> For the complete documentation index, see [llms.txt](https://help.security.gallagher.com/knowledge-hub/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/jacques-intercoms.md).

# Jacques Intercoms

Jacques Intercoms is a licensable feature, i.e. your license file must contain the following option:

`[Features]`\
`JacquesIntercom=1`

The Intercom System item (located in the **External Systems** List Window) allows the Jacques IP Intercom System to be integrated with Gallagher Command Centre.

At the time your site installed Command Centre, the 'Intercom Server' option should have been checked under the Server components. If it was not, you will need to re-install Command Centre (remembering to check the 'Intercom Server' option), before using the Intercom Systems feature.

The integration between the two systems provides support for:

* Notifying a Command Centre operator when a call request is received.
* Answering an Intercom call on a Jacques Intercom connected to a Gallagher Command Centre workstation.
* Making an Intercom call from a Gallagher Command Centre workstation connected to a Jacques Intercom.
* Placing a call on hold from a Gallagher Command Centre workstation.
* Forwarding an Intercom call to another Intercom from a Gallagher Command Centre workstation.
* Monitor (listen to) an intercom from a Gallagher Command Centre workstation (only available in Command Centre Client).
* Managing a queue of waiting calls from a Gallagher Command Centre workstation.
* Allowing an operator to open a Gallagher Command Centre door in response to an Intercom call.
* Temporarily placing a workstation into "remote mode".
* Logging events and alarms from the Intercom System into the Gallagher Command Centre activity log.
* Monitoring the status of an Intercom.

**Notes:**

* The integration between the two systems does not allow for recording an Intercom call, or integrating an Intercom's general purpose I/O into Gallagher Command Centre.
* This interface is supported, and has been tested on version 4.64 of the Jacques Intercom software server.
* HLI-VRX is the correct type to use for the Wordkstation.

***

### Jacques Intercom Icons

The Jacques Intercom icon (which can appear on the Status Viewer and Site Plans) has four states, as follows:

<table><thead><tr><th width="174">When an intercom is...</th><th>then the icon is in the...</th></tr></thead><tbody><tr><td>idle,</td><td><img src="https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-2f41b8ba41bc41cbd023bc9eb70e6f1cbbcb34f2%2Fjacques_intercom.png?alt=media" alt=""> Normal Operation state, and on a Site Plan the line/area colour is Black.</td></tr><tr><td>ringing,</td><td><img src="https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-05f71ce44c9279ac9cfbe43d1e396249c62eb10b%2Fjacques_intercomringing.png?alt=media" alt=""> Call ringing state, and on a Site Plan the line/area colour is Red.</td></tr><tr><td>connected on a call,</td><td><img src="https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-7ea768ef48a77615e5959152e7c96612c3a839f4%2Fjacques_intercomactive.png?alt=media" alt=""> Call connected state, and on a Site Plan the line/area colour is Green.</td></tr><tr><td>connected for monitoring,</td><td><img src="https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-17c016a79d42dd5141d2fad6cad7200257d69687%2Fjacques_intercommonitoring.png?alt=media" alt=""> Monitoring connected state, and on a Site Plan the line/area colour is Blue.</td></tr><tr><td>on hold,</td><td><img src="https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-45d4f260feecf950351fbf62a0875246454f441f%2Fjacques_intercomonhold.png?alt=media" alt=""> On Hold state, and on a Site Plan the line/area colour is Orange.</td></tr></tbody></table>

***

### Configuring the Jacques Intercom feature in the Configuration Client

To configure the Jacques Intercom feature, perform the following procedures in the Configuration Client:

![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-f30c70c9dfd07493527af00bd979539606de5d30%2Ftopiclink.png?alt=media) [Configuring a Jacques Intercom System](https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/jacques-intercoms/configuring-a-jacques-intercom-system.md)

![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-f30c70c9dfd07493527af00bd979539606de5d30%2Ftopiclink.png?alt=media) [Configuring a Jacques Intercom Item](https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/jacques-intercoms/configuring-a-jacques-intercom-item.md)

![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-f30c70c9dfd07493527af00bd979539606de5d30%2Ftopiclink.png?alt=media) [Opening the Intercom window](https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/jacques-intercoms/opening-the-intercom-window.md)

![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-f30c70c9dfd07493527af00bd979539606de5d30%2Ftopiclink.png?alt=media) [Placing a call](https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/jacques-intercoms/placing-a-call.md)

![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-f30c70c9dfd07493527af00bd979539606de5d30%2Ftopiclink.png?alt=media) Answering a call


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/jacques-intercoms.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
