> For the complete documentation index, see [llms.txt](https://help.security.gallagher.com/knowledge-hub/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/guard-tours/creating-a-new-guard-tour.md).

# Creating a new Guard Tour

### Introduction

This procedure describes how to create a Guard Tour.

### Operator Privileges

<table><thead><tr><th width="540">To...</th><th>you require the...</th></tr></thead><tbody><tr><td><ul><li>view the details of the guard tour, (e.g. the checkpoints on the tour, their sequence and the timing that the guard must adhere to if they are not to trigger alarms)</li><li>view the priority assigned to each type of Guard Tour alarm and to see which guards are allocated specific Guard Tours</li></ul></td><td>"View Guard Tours" privilege in the appropriate division.</td></tr><tr><td><ul><li>create, edit and delete the details of a Guard Tour, including the checkpoints on the tour, their sequence and the timing that the guard must adhere to if they are not to trigger alarms</li><li>assign the priority for each type of Guard Tour alarm and to allocate guards to specific Guard Tours</li></ul></td><td>"Edit Guard Tours" privilege in the appropriate division.</td></tr></tbody></table>

### Procedure

1. Click **Configure** from the menu bar, then **Guard Tours**.

   The **Guard Tour** List Window opens (in [grid view](https://help.security.gallagher.com/knowledge-hub/configuration-client/introduction-to-command-centre/knowing-your-way-around/list-windows/grid-view.md)).
2. **Right click** and select **New\...Guard Tour**.

   By default the **General** tab displays.
3. Complete the fields as required.

   For further detail see [General tab](https://help.security.gallagher.com/knowledge-hub/configuration-client/introduction-to-command-centre/knowing-your-way-around/generic-properties-configuration/general-tab.md).
4. Click the **Event Response** tab, and configure as required.

   For further detail see [Event Response tab](https://help.security.gallagher.com/knowledge-hub/configuration-client/introduction-to-command-centre/knowing-your-way-around/generic-properties-configuration/event-response-tab.md).
5. Click the **Alarm Instructions** tab, and configure as required.

   For further detail see [Alarm Instructions tab](https://help.security.gallagher.com/knowledge-hub/configuration-client/introduction-to-command-centre/knowing-your-way-around/generic-properties-configuration/alarm-instructions-tab.md).
6. Click the **Checkpoints** tab.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-4e77ff62cd602de697ff79964e3ef01b31cf10b7%2Fguardtour_checkpointstab.png?alt=media)

   Doors, Inputs, Outputs, Logic Blocks, Aperio Doors and External System Items can be added to a Guard Tour as checkpoints. Note that each item needs to create an event in order for the Guard Tour to continue, (e.g. In the case of an input, an Alarm Zone will need to be assigned to the input with an Action Plan that logs an event when it triggers).
7. Open the List Window that contains the item required as a checkpoint in this Guard Tour.

   For example, open the **Door** List Window.
8. Select the required item(s).

   Drag and drop them into the **Checkpoints** tab.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-b3a62d87e9616789b4e248d4357de79c8c411c8c%2Fdoors_into_guardtour.png?alt=media)
9. Repeat Steps 7 and 8 for all items to be included as checkpoints.
10. Sort your selection of checkpoints by clicking on one and using the arrow buttons to the right of the grid to move it.

    The order you define here will be the order in which a guard must visit the checkpoints.

    ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-3db5717d6868af0d6b4226e7218897ed4b561828%2Fguardtour_checkpointtimings.png?alt=media)
11. Highlight a checkpoint in the grid, and configure the timing parameters for it as follows:

    <table><thead><tr><th width="114">Field</th><th>Description</th></tr></thead><tbody><tr><td>Transit Time</td><td><p>The period of time (in hours, minutes and seconds), it should take a guard to move from the last checkpoint to this checkpoint.</p><p>(Default = 00:01:00. Allowable range = 00:00:01 to 23:59:59)</p></td></tr><tr><td>Deviation</td><td><p>The maximum allowable deviation (in hours, minutes and seconds).</p><p>(Default = 00:00:30. Allowable range = 00:00:01 to 23:59:59)</p></td></tr><tr><td>Max late</td><td><p>Maximum late time, in hours, minutes and seconds.</p><p>(Default = 00:01:30. Allowable range = 00:00:00 to 23:59:59)</p></td></tr></tbody></table>
12. If a guard is required to enter the Access Zone related to the checkpoint, check the **Guard must enter** checkbox.
13. Repeat Steps 11 and 12 for each checkpoint.
14. Select the Access Group that your guards belong to from the **Guard Access Group** drop-down list.

    **Note:** Any cardholder in the selected Access Group can be assigned to the Guard Tour. For this reason, it may be helpful to create an Access Group specifically for guards. That way, when a Guard Tour is run, the Access Group acts as a filter and only guards will appear in the **Guard** drop-down list.
15. Click the **Icons** tab if you want to change the Icon Set for this Guard Tour.

    For further details regarding the **Icons** tab, see [Icons](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/server-properties/icons.md).
16. Click the **Custom Fields** tab if you want to add and assign a custom field value to this Guard Tour.

    For further details regarding the **Custom Fields** tab, see [Custom Fields](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/server-properties/custom-fields.md).
17. Click the **Notes** tab if you want to add a note(s) about this Guard Tour.

    For further details regarding the **Notes** tab, see [Notes](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/server-properties/notes.md).
18. Click **OK** to exit and save your changes.

    Click **Cancel** to exit without saving your changes.

    Click **Apply** to save your changes and stay in this window.

### Result

A new Guard Tour is configured.

### Hints

{% hint style="info" %}
**Editing and Deleting Guard Tours**

Refer to [Editing items](https://help.security.gallagher.com/knowledge-hub/configuration-client/introduction-to-command-centre/knowing-your-way-around/generic-properties-configuration/editing-items.md) and [Deleting items](https://help.security.gallagher.com/knowledge-hub/configuration-client/introduction-to-command-centre/knowing-your-way-around/generic-properties-configuration/deleting-items.md) for procedures on how to edit and delete Guard Tours.

**Note:** The system will not allow the deletion of a Guard Tour when it:

* is currently running,
* appears on a Site Plan, or
* is used in a Macro

Additionally, the Access Group, or a checkpoint assigned to a Guard Tour cannot be deleted without the tour being deleted, or the item first being removed from the tour.
{% endhint %}

{% hint style="info" %}
**Copy and paste**

An alternative to the drag and drop method is to use the copy and paste method.
{% endhint %}


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/guard-tours/creating-a-new-guard-tour.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
