> For the complete documentation index, see [llms.txt](https://help.security.gallagher.com/knowledge-hub/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/commend-intercoms/configuring-a-commend-intercom-system.md).

# Configuring a Commend Intercom System

### Introduction

This procedure describes how to configure a Commend Intercom System. Only one Commend Intercom System can be installed per Command Centre Server.

### Procedure

1. Click **Configure** from the menu bar, then **External Systems**.

   The External Systems List Window opens (in [tree view](https://help.security.gallagher.com/knowledge-hub/configuration-client/glossary-of-terms.md#tree-view)).
2. Right click and select **New\...Commend Intercom System**.

   By default the **General** tab displays.
3. Type in the Name and select the Division. The **Description** field is populated and updated automatically from the Commend Intercom server.
4. Click the **Event Response** tab, and assign a primary Alarm Zone for all events.

   For further detail see [Event Response tab](https://help.security.gallagher.com/knowledge-hub/configuration-client/introduction-to-command-centre/knowing-your-way-around/generic-properties-configuration/event-response-tab.md).
5. Click the **Setup** tab.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-e7ee345779df7e9000eebb9448e0ba771ff2b3d7%2Fcommendintercomsystem_setuptab.png?alt=media)
6. Enter the Commend Intercom ICX interface’s PC's IP Address in the **Name/IP-Address** field.

   This field is limited to 255 alpha-numeric characters. The IP Address will be provided by your Commend Intercom installer.
7. Enter the Commend Intercom ICX interface’s Local Port Number in the **TCP Port No.** field.

   This field must be between 1 and 65535. The Port Number will be provided by your Commend Intercom installer.
8. Enter the count down time period (in seconds) in the **Count down from** field.

   This is the period of time whereby an operator is required to select the **Answer** button, and must be between 0 and 600. Default is 90 seconds.

   **Note:** A value of zero means an unanswered call will not timeout.
9. Enter a password into the **Password** field if you have been provided one from your Commend Intercom installer. Otherwise, leave blank.
10. Click the **Icons** tab if you want to change the Icon Set for this Intercom System.

    For further details regarding the **Icons** tab, see [Icons](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/server-properties/icons.md).
11. Click the **Custom Fields** tab if you want to add and assign a custom field value to this Intercom System.

    For further details regarding the **Custom Fields** tab, see [Custom Fields](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/server-properties/custom-fields.md).
12. Click the **Notes** tab if you want to add a note(s) about the Intercom System.

    For further details regarding the **Notes** tab, see [Notes](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/server-properties/notes.md).
13. Click **OK** to exit and save your changes.

    Click **Cancel** to exit without saving your changes.

    Click **Apply** to save your changes and stay in this window.

### Result

The Commend Intercom System has been created and displays at the root level of the External Systems window, with no children.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/commend-intercoms/configuring-a-commend-intercom-system.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
