> For the complete documentation index, see [llms.txt](https://help.security.gallagher.com/knowledge-hub/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/austco-intercoms.md).

# Austco Intercoms

Austco Intercoms is a licensable feature, i.e. your license file must contain the following options:

`[Features]`\
`AustcoIntercom=1`

`[Limits]`\
`Austco Intercom System=N`\
`Austco Intercom=NN`

The Austco Intercom System item (located in the **External Systems** List Window) allows the Austco Intercom System to be integrated with Gallagher Command Centre.

At the time your site installed Command Centre, the 'Intercom Server' option should have been checked under the Server components. If it was not, you will need to re-install Command Centre (remembering to check the 'Intercom Server' option), before using the Intercom Systems feature.

The integration between the two systems provides support for:

* Notifying a Command Centre operator when a call request is received.
* Answering an intercom call from a Command Centre workstation.
* Making an intercom call from a Command Centre workstation.
* Managing a queue of waiting calls from a Command Centre workstation.
* Allowing an operator to open a Command Centre door in response to an intercom call.
* Logging events and alarms from the Austco Intercom System into the Command Centre activity log.
* Monitoring the status of an intercom.

**Notes:**

* The integration between the two systems does not allow for recording an intercom call, or integrating an intercom's general purpose I/O into Command Centre.
* The time settings on the server and workstations must be synchronised. Any time difference between the server and workstation will result in the amount of time difference to be added or subtracted from the displayed "Seconds Remaining" in the Austco Intercom Viewer.
* Do not generate alarms from intercom call events.

***

### Austco components

This integration is intended for use with Austco sites where their ACM configuration file has been modified by Austco to include sending ACMIP messages to an external device, such as "(\_1\_1 CONNECT \_AC-H1-1), and (\_1\_1 DISCONNECT \_AC-H1-1)". Please contact Austco to ask for the modifications needed for use with Command Centre. You will then be required to transfer new node files to your Austco nodes. Without these modifications, this integration will not work correctly.

**Note:** The message-interface SYMBOL is hard coded in the Gallagher system as "\_ED-1". This may cause problems when a site is installing an Austco intercom system, (i.e. the intercom service may not start, and the Austco intercom may not connect to Command Centre if the Austco server is not left in it’s default SYMBOL configuration).

This integration has been tested using the following Austco software and hardware:

<table><thead><tr><th width="276">Software</th><th>Hardware</th></tr></thead><tbody><tr><td>ACM-CS v3.1-b7</td><td>2 x CI-CC Austco Intercom</td></tr><tr><td>FSS Kernel ACM-CS v4.5.7-b2</td><td>1 x CI-8A Austco Intercom Controller</td></tr><tr><td>ACM v0.7</td><td>1 x CI-3210 Staff Station</td></tr><tr><td>Site Configuration v4.0.20.1</td><td></td></tr><tr><td>Site Management Console v 2.4.11</td><td></td></tr></tbody></table>

***

### Austco Intercom icons

The Austco Intercom icon (which can appear on the Status Viewer and Site Plans) has three states, as follows:

<table><thead><tr><th width="186">When an intercom is...</th><th>then the icon is in the...</th></tr></thead><tbody><tr><td>idle,</td><td><img src="https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-935b8a50aad6a60cd938cb361d34bfe8b6c85b68%2Faustco_normaloperation.png?alt=media" alt=""> Normal Operation state, and on a Site Plan the line/area colour is Black.</td></tr><tr><td>ringing,</td><td><img src="https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-962338c6fef39274f6c34d6abd77970116140f4b%2Faustco_callringing.png?alt=media" alt=""> Call ringing state, and on a Site Plan the line/area colour is Red.</td></tr><tr><td>connected on a call,</td><td><img src="https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-fab13f6000f484826f1cfd825844b83fbecfb10f%2Faustco_callconnected.png?alt=media" alt=""> Call connected state, and on a Site Plan the line/area colour is Green.</td></tr></tbody></table>

***

### Configuring Austco Intercoms

To configure Austco Intercoms, perform the following procedures in the Configuration Client:

![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-f30c70c9dfd07493527af00bd979539606de5d30%2Ftopiclink.png?alt=media) [Configuring an Austco Intercom System](https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/austco-intercoms/configuring-an-austco-intercom-system.md)

![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-f30c70c9dfd07493527af00bd979539606de5d30%2Ftopiclink.png?alt=media) [Configuring an Austco Intercom Item](https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/austco-intercoms/configuring-an-austco-intercom-item.md)

![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-f30c70c9dfd07493527af00bd979539606de5d30%2Ftopiclink.png?alt=media) [Assigning an Austco Console to a Workstation](https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/austco-intercoms/assigning-an-austco-console-to-a-workstation.md)

![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-f30c70c9dfd07493527af00bd979539606de5d30%2Ftopiclink.png?alt=media) [Locating an Austco Symbol](https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/austco-intercoms/locating-an-austco-symbol.md)


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/austco-intercoms.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
