> For the complete documentation index, see [llms.txt](https://help.security.gallagher.com/knowledge-hub/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.security.gallagher.com/knowledge-hub/configuration-client/integrated-systems/thyssenkrupp-insight-elevator-systems/configuring-a-thyssenkrupp-kiosk.md).

# Configuring a ThyssenKrupp Kiosk

### Introduction

Kiosks tend to be situated in lobbies / waiting areas on different floors outside of an elevator. The ThyssenKrupp Kiosk Item represents a kiosk, with or without associated readers.

This procedure enables an operator with either the "Advanced User" or "Edit Site" privilege to configure a ThyssenKrupp Kiosk.

### Configuration

To configure a ThyssenKrupp Kiosk, perform the following procedures in Gallagher Configuration Client:

1. Click **Configure** from the menu bar, then **Elevator Systems**.

   The **Elevator Systems** List Window opens.
2. ThyssenKrupp Kiosk items are created using the Discovery feature described in the *Configuring a ThyssenKrupp Insight Elevator System* procedure.

   Locate the Kiosk item in the List Window as a child of the ThyssenKrupp Elevator Group item and open the property sheet as usual. The ThyssenKrupp System or Elevator Group child items may need to be expanded by clicking the **+** button beside its name. The **General** tab will display by default.

   **Note:** ThyssenKrupp Kiosk items are created by using the **Elevator Devices** tab as described in [Configuring a ThyssenKrupp Insight Elevator System](https://help.security.gallagher.com/knowledge-hub/configuration-client/integrated-systems/thyssenkrupp-insight-elevator-systems/configuring-a-thyssenkrupp-insight-elevator-system.md).
3. Complete the fields as required.

   For further detail see [General tab](https://help.security.gallagher.com/knowledge-hub/configuration-client/introduction-to-command-centre/knowing-your-way-around/generic-properties-configuration/general-tab.md).
4. Click each tab in turn to configure the elevator kiosk.

<details>

<summary>Configuration tab</summary>

1. Click the **Configuration** tab.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-438d65d449cd2a42d708c8b19a1d16a731137e92%2Ftkelevatorkiosk_configurationtab.png?alt=media)

   The ThyssenKrupp Elevator Group, Floor, Kiosk Number and Side are set when the kiosk is created and cannot be changed.
2. Select the **Controller** that will be making access decisions for this kiosk from the drop-down list.
3. The behaviour of the kiosk on how it directs a cardholder to a floor can be changed via the **Destination Mode** radio button you select.

   Click the appropriate radio button:

   <table><thead><tr><th width="184">If you select...</th><th>then...</th></tr></thead><tbody><tr><td>Display available floors,</td><td>it disregards any designated default floor for a cardholder by displaying all available floors.</td></tr><tr><td>Send to default floor,</td><td><p>the <strong>Turnstile</strong> checkbox becomes enabled.</p><p>Is the site using turnstiles in conjunction with the Kiosk?</p><p>If <strong>no</strong>, go to Step 4.<br>If <strong>yes</strong>, go to Step 6.</p></td></tr></tbody></table>
4. Select the **Reader** associated with the kiosk from the drop-down list.

   As soon as the cardholder badges, they will be directed to a particular elevator which will take them to the default floor without any further interaction.

   **Note:** If you want to use an integrated DED reader with the kiosk, configure as follows:

   1. Leave the **Reader** as "-- None selected --".
   2. Add the appropriate UCF to the Controller **Card Formats** tab.

      **Note:** Usually the 'Weigand 26/8 bit' UCF will work.
5. Check the **Disable Feedback** checkbox to prevent commands (display prompts, icons, LEDs, and playing tunes) from being sent to the reader(s).

   These commands would normally be associated with access attempts when a cardholder presents their card.

   Go to Step 8.
6. Check the **Turnstile** checkbox.

   The **Reader** field below it changes to **Associated Door**, and the **Disable Feedback** checkbox disappears.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-1e7f3e8e7b25ddecd5719552afc2533759cf13f5%2Ftkelevatorkiosk_turnstileselected.png?alt=media)
7. Select the door associated with the kiosk from the **Associated Door** drop-down list. This allows a door to be associated with the kiosk to perform the access granted behaviour required for setting up a Turnstile.
8. Check the **Sleep Mode** to enable the sleep mode on the Kiosk.

   Sleep mode requires that a passenger badges their card to ‘wake up’ the kiosk before they select a floor.
9. Configure the Walk Time and Extended Walk Time settings as appropriate. (Range = 0 - 255 seconds)

   <table><thead><tr><th width="184">Setting</th><th>Function</th></tr></thead><tbody><tr><td>Walk Time</td><td>The estimated time it takes to walk from the kiosk to the elevator.</td></tr><tr><td>Extended Walk Time</td><td>The estimated additional time it takes an ADA passenger to walk from the kiosk to the elevator.</td></tr><tr><td colspan="2"><p><strong>Notes:</strong></p><ul><li>While the allowable range for both <strong>Walk Time</strong> and <strong>Extended Walk Time</strong> is 0 - 255 seconds, the maximum <strong>combined value</strong> of both fields can be no more than 255 seconds.</li><li>These times are only taken into consideration when the Register Call messaging is used for the Default Floor Feature.</li></ul></td></tr></tbody></table>

</details>

<details>

<summary>Source Control tab</summary>

1. Click the **Source Control** tab.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-ed13b590dc119eb2457da2701531e593e80a72fe%2Ftkelevatorkiosk_sourcecontroltab.png?alt=media)

   This tab allows a site to set different access options for the kiosk in different parts of the building.

   The **Floors** grid is initially populated with the floor map from the Elevator Group the kiosk is a member of, and the two borders indicate which floor the kiosk is on, (e.g. Floor 1 in the screen shot above).
2. If you want to update the kiosk with the same Source Control settings as another kiosk, click the **Copy From** button, and select the appropriate kiosk from the drop-down list next to the button.

   **Note:** The drop-down list will be restricted to kiosks with Source Control within the Elevator Group.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-a40a54786f875d46063a717bc3c0e18d6caab712%2Ftkelevatorkiosk_sourcecontroltab3.png?alt=media)
3. To enable free access between floors, (e.g. Floors 2 and 3 in the screen shot below), select each floor requiring free access in turn, and click the **Free Access** radio buttons for Front and Rear Access.

   **Note:** The changes show in **bold** before saving.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-ae42ddbdfd713c1f3525ca79898f3f14895fdcd1%2Ftkelevatorkiosk_sourcecontroltab2.png?alt=media)

   To enable free access only to the front and NOT the rear between floors 2 and 3, click the **Free Access** radio button for Front Access and the **Not Serviced** radio button for Rear Access.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-53c90189d92a90ebd76887fd44bd7f042ea9f65b%2Ftkelevatorkiosk_sourcecontroltab2a.png?alt=media)
4. If you want to assign an Elevator Kiosk Control Schedule to a floor, select the appropriate one from the **Schedule** drop-down list.

   **Note:** If you intend assigning Elevator Kiosk Control Schedules to the kiosk, the schedules need to be created first. See [Creating an Elevator Kiosk Control Schedule](https://help.security.gallagher.com/knowledge-hub/configuration-client/integrated-systems/thyssenkrupp-insight-elevator-systems/creating-an-elevator-kiosk-control-schedule.md) for the procedure.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-a8941a9b6de1065954e3e5b45106d35241df789d%2Ftkelevatorkiosk_sourcecontroltab5.png?alt=media)

   The state configured in the schedule you select, (i.e. either 'source control' or 'destination control' state) will now be active on the kiosk.

   **Note:** The **Status and Overrides** tab of the kiosk will show whether source control or destination control is active at the moment.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-af1e874b4f205c7c90a3b927210613d2b836c2b7%2Ftkelevatorkiosk_status%26overridestab.png?alt=media)

</details>

5. Click the **Cameras** tab if you want to associate a DVR Camera(s) with this kiosk.

   For further details see [Cameras tab](https://help.security.gallagher.com/knowledge-hub/configuration-client/introduction-to-command-centre/knowing-your-way-around/generic-properties-configuration/cameras-tab.md).
6. Click the **Icons** tab if you want to change the Icon Set for this kiosk.

   For further details regarding the **Icons** tab, see [Icons](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/server-properties/icons.md).
7. Click the **Custom Fields** tab if you want to add and assign a custom field value to this kiosk.

   For further details regarding the **Custom Fields** tab, see [Custom Fields](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/server-properties/custom-fields.md).
8. Click the **Notes** tab if you want to add a note(s) about this kiosk.

   For further details regarding the **Notes** tab, see [Notes](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/server-properties/notes.md).
9. Click **OK** to exit and save your changes.

   Click **Cancel** to exit without saving your changes.

   Click **Apply** to save your changes and stay in this window.

### Result

A ThyssenKrupp Kiosk is configured.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.security.gallagher.com/knowledge-hub/configuration-client/integrated-systems/thyssenkrupp-insight-elevator-systems/configuring-a-thyssenkrupp-kiosk.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
