> For the complete documentation index, see [llms.txt](https://help.security.gallagher.com/knowledge-hub/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.security.gallagher.com/knowledge-hub/configuration-client/integrated-systems/thyssenkrupp-insight-elevator-systems/configuring-a-thyssenkrupp-elevator-group.md).

# Configuring a ThyssenKrupp Elevator Group

### Introduction

In a ThyssenKrupp Insight Elevator System, an Elevator Group is a collection of elevators and kiosks which service the same set of floors. They consist of 1-15 elevator controllers which are each allocated a unique elevator car number in the range 1-15.

This procedure enables an operator with either the "Advanced User" or "Edit Site" privilege to configure a ThyssenKrupp Elevator Group.

### Configuration

To configure a ThyssenKrupp Elevator Group, perform the following procedure in Gallagher Configuration Client:

1. Click **Configure** from the menu bar, then **Elevator Systems**.

   The **Elevator System** s List Window opens.
2. ThyssenKrupp Elevator Group items are created using the Discovery feature described in the *Configuring a ThyssenKrupp Insight Elevator System* procedure.

   Locate the Elevator Group item in the List Window as a child of the ThyssenKrupp System item and open the property sheet as usual. The ThyssenKrupp System’s child items may need to be expanded by clicking the **+** button beside its name. The **General** tab will display by default.

   **Note:** ThyssenKrupp Elevator Group items are created by using the **Elevator Devices** tab as described in [Configuring a ThyssenKrupp Insight Elevator System](https://help.security.gallagher.com/knowledge-hub/configuration-client/integrated-systems/thyssenkrupp-insight-elevator-systems/configuring-a-thyssenkrupp-insight-elevator-system.md).
3. Complete the fields as required.

   For further detail see [General tab](https://help.security.gallagher.com/knowledge-hub/configuration-client/introduction-to-command-centre/knowing-your-way-around/generic-properties-configuration/general-tab.md).
4. Click the **Configuration** tab.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-2e17ed07adee3afb6c351f96c2cb7909d7175ba6%2Ftkelevatorgroup_configurationtab.png?alt=media)

   The ThyssenKrupp System and Group number are set when the group is created and cannot be changed.
5. Enter or select the **Number of floors** in the building accessed by the elevator group, (range 1-128).

   This automatically populates the grid with the required number of Floors listed, bottom to top, as they would be in an elevator. By default, floors are set to **-- Free Access --** allowing any passenger to go to that floor.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-7bcf4b5681cb0ed176276b4b8808235d87ffbd1b%2Ftkelevatorgroup_floors.png?alt=media)
6. If the elevators in this Elevator Group open front and back (opposite sides), check the **Enable Rear Access** checkbox. Rear access properties are then available for configuration.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-c85817e1386821d0b97987175bfcce2a08adea3d%2Ftkelevatorgroup_doubledoors.png?alt=media)

   If required, select the floor in the grid that is on ground level and check the **Ground Floor** checkbox.

   A line appears underneath that floor indicating that it is the ground floor and floors below this will be re-labelled to indicate that they are basement floors.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-2c3d440e4b7c8a01463eee9db657704fe2bdac52%2Ftkelevatorgroup_groundfloor.png?alt=media)
7. Change the **Floor Name** to a four-character label if required.

   **Note:** The system does not allow duplicates.
8. If the elevator group does not service a building floor, untick the **Front Access** or **Rear Access** checkbox.

   The access will change to **-- Not Available --**.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-fcea0f0b605f5a4cf5cd682baf56848bbc16eaac%2Ftkelevatorgroup_notservicefloor.png?alt=media)
9. If a floor is access controlled, check the **Front Access** checkbox, (and **Rear Access** checkbox if applicable), and select the Access Zone that represents the area outside the elevator on this particular floor from the drop-down list.

   **Note:** Access Zones can also be dragged from the Access Zones List Window or the Find Tool and dropped directly on the cell in the **Floors** grid.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-ac0bd4d7f9bddb809f53364d8bc96cf0b68450da%2Ftkelevatorgroup_flooraz.png?alt=media)
10. Keep selecting rows (or floors) and repeating Step 10 until an Access Zone has been selected for each Floor to which access is controlled by Command Centre.

    **Note:** If you do not select an Access Zone for a Floor, this means the associated floor is in Free Access mode.

    ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-434c9f96640daacda589cb06bbb682d9dbf07b93%2Ftkelevatorgroup_flooraccess.png?alt=media)

    In this example, **Floor 1 Front** is the area outside the front access on Floor 1 (the 3rd building floor), and **Floor 3 Rear** is outside the rear access on Floor 3 (the 5th building floor).
11. Click the **Cameras** tab if you want to associate a DVR Camera(s) with this Elevator Group.

    For further details see [Cameras tab](https://help.security.gallagher.com/knowledge-hub/configuration-client/introduction-to-command-centre/knowing-your-way-around/generic-properties-configuration/cameras-tab.md).
12. Click the **Icons** tab if you want to change the Icon Set for this Elevator Group.

    For further details regarding the **Icons** tab, see [Icons](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/server-properties/icons.md).
13. Click the **Custom Fields** tab if you want to add and assign a custom field value to this Elevator Group.

    For further details regarding the **Custom Fields** tab, see [Custom Fields](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/server-properties/custom-fields.md).
14. Click the **Notes** tab if you want to add a note(s) about this Elevator Group.

    For further details regarding the **Notes** tab, see [Notes](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/server-properties/notes.md).
15. Click **OK** to exit and save your changes.

    Click **Cancel** to exit without saving your changes.

    Click **Apply** to save your changes and stay in this window.

### Result

A ThyssenKrupp Elevator Group is configured.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.security.gallagher.com/knowledge-hub/configuration-client/integrated-systems/thyssenkrupp-insight-elevator-systems/configuring-a-thyssenkrupp-elevator-group.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
