> For the complete documentation index, see [llms.txt](https://help.security.gallagher.com/knowledge-hub/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.security.gallagher.com/knowledge-hub/configuration-client/integrated-systems/schlage-lock-interface/schlage-device-setup-and-configuration.md).

# Schlage Device Setup and Configuration

Setup and configuration of the Schlage PIM400 wireless gateway and AD30X/ AD40X locks can be performed using the Schlage Utility Software (SUS) application and portable Schlage Handheld Device (HHD).

![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-1e924b7607eff7560ce48adc7270ce84609fd84e%2Fsusfunctionsbydevice.png?alt=media)

1 The AD40X wireless lock properties may also be viewed or edited through the PIM400

2 These devices will become AD302 and AD402 when a FMK reader is attached to work with the FIPS201-2 standard

For complete detailed instructions, refer to the document **Schlage Utility Software User Guide 104390.pdf** located in the `'Utilities\Schlage\ Documentation'` directory of the Command Centre installation media.

The latest version of the [Schlage Utility Software User Guide](https://us.allegion.com/en/resources/resource-library/document-library/schlage-documents.html?3_group.propertyvalues.property=.%2fjcr:content%2fmetadata%2fcq:tags&3_group.propertyvalues.operation=equals&3_group.propertyvalues.4_values=allegion-us-2:web-docs%2ftechnical-docs%2fuser-guides\&layout=list\&p.offset=0\&p.limit=100) can be sourced from the Schlage website.

<details>

<summary>Schlage Windows based Handheld Device (HHD) Setup Configuration</summary>

To begin using the Schlage Utility Software (SUS), perform the following steps:

1. Download and install Synchronisation Software (page 9)
2. Connect the HHD to your PC (page 13)
3. Configure the Synchronisation Software (page 10)
4. Update SUS (page 13)
5. Start SUS (page 15)
6. Connect the Handheld Device to a Lock or Non-Lock Device (page 20)

You can login to the Schlage Utility Software (SUS) as either a Manager or an Operator. The Manager role has access to all commands. The Operator role has access only to limited commands.

![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-b036b3cc77132a429a8f6dbce24d514e914a5ef7%2Fsuscommands.png?alt=media)

The default SUS password for both the Manager and Operator is 123456. If the password is lost, you must reinstall SUS.

The process of connecting the HHD to a Schlage device is called Coupling. Coupling to each Schlage Hardware device is required to configure and pair Schlage devices to one another.

Coupling can only be performed by Managers. The default coupling password is 123456.

{% hint style="danger" %}
**Important**: It is important to record and store the coupling password in a safe place for future use.
{% endhint %}

</details>

<details>

<summary>Connecting Handheld Device to AD Series Lock</summary>

The HHD will use a default Coupling Password (123456) when coupling with a device. The Coupling Password should be changed to provide increased security for your locks. If a device is not in Coupling mode, SUS will display a device specific message with instructions for placing the device into Coupling mode.

**AD30X and AD40X coupling to device and upgrading firmware:**

1. Connect the HHD to the lock using the HH-USB cable.
2. Open up the Schlage Utility Software.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-1a924aa8b16692fa8ae880aa7269c8893d15e0d3%2Fschlageutilitysw_icon.png?alt=media)
3. Log in as Manager using password.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-92a48704daaa6472017f1bc8fd7b560599a1a763%2Fschlageloginscreen.png?alt=media)
4. Click the bottom right button to change the connection type to USB.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-02438b1635838b932ce721ba01a4e0e0cebdbcf9%2Fschlagemainscreen_usbconnection.png?alt=media)
5. Press the **Schlage** button on the lock twice. The lock displays on the screen.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-82295f8b0cc1890f7aa2dd17031894b7d24b852b%2Fschlagemainscreen.png?alt=media)
6. On the HHD, select **Device Options**.
7. Remove the top cover of the lock (not the reader).

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-ad94a086fbe3c13e66f758d01f9553613de3437d%2Fschlagelockcover.png?alt=media)
8. While pressing and holding the **Privacy** button (A), press and release the **Tamper** switch (B) three times.
9. Release the **Privacy** button. The LED of the **Privacy** button will illuminate.
10. On the HHD, select **Couple HHD to Device**.

    ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-9ab774064916094afb6b99f0f0806168ca3e0196%2Fcouplehhdtodevice.png?alt=media)
11. When Coupling is successful, a message will be displayed on the screen.

It is important to update the lock firmware to the latest version available. The AD series lock firmware Gallagher has tested is 2.50.1 for AD300/AD400 and 2.2.1 for AD302/AD402. A copy of this firmware is located at `'Utilities\ Schlage\AD Firmware\AD.A.130'`.

To upgrade the firmware of the AD30X and AD40X locks, please refer to the procedure in the "Device Firmware Update" section of the *Schlage Utility Software User Guide*.

**AD30X configuring RS485 address:**

After connecting the HHD to device as above steps 1-5 on the HHD, select **Lock Properties** > **Edit** tab and set **RS485 Address** field to a value in the range of 0 - 254 (except 170). Different addresses should be used for devices connected to the same RS485 port on the controller.

![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-329473cee459297330da8f82ec5d330ee059e41e%2Fschlageedittab.png?alt=media)

</details>

<details>

<summary>Connecting Handheld Device to PIM400</summary>

1. Remove the PIM400 cover.
2. The HHD must be in USB mode.
3. Connect the HHD to the PIM400 using the HH-USB cable.

   The PIM400 will be displayed on the HHD screen.
4. On the HHD, select **Device Options**.
5. On the PIM400, press and hold the **LINK 1** button. Then press the **LINK 2** button three times.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-9b41c09197fce38e655675f0321b40877f32b7e5%2Fconnecthhdtopim400.png?alt=media)
6. On the HHD, select **Couple HHD to Device**.
7. When Coupling is successful, a message will be displayed on the HHD screen.
8. Click **Device Options** / **PIM Properties** / **Edit** tab.
9. On the PIM Properties Edit page configure:

   1. **RS485 Address**

      **Note:** This can be a value in the range from 0 - 254, except 170.
   2. **Low Door**, and
   3. **High Door** then click **Save**.

      **Note:** Settings being set should be the same settings to set when configuring Schlage PIM and Door.

      ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-5eb3775a8ca606830bdc2d15dfc248454e0de8ec%2Fschlagepimproperties.png?alt=media)

   In the example shown, the PIM400 is set to RS485 address 1 with 2 doors attached at address locations 0 and 1.

</details>

<details>

<summary>Coupling an AD40X with a PIM400</summary>

1. Click on the **Link** tab, and set the door number and click **Link**.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-e3ff5517a97aca99f389c0dccd9e4dfccea5cbe5%2Fschlageselectdoor.png?alt=media)
2. Open Schlage AD40X back door handle and press " **#** " once then " **SCHLAGE** " button twice. Keep the Schlage back door handle open until the "SCHLAGE" LED blink in **GREEN**.
3. Wait for 6 **BEEP** response on the Schlage door sensor or the SUS link pagefinished the linking. The door is linked to the PIM now.

</details>

### Finishing configuration

After configuration of the PIM and lock is finished, go back to the SUS Main screen, navigate to **SUS options** > **Connection Type** and change the connection type back to serial.

It is important to update the PIM400 firmware to the latest version available. The PIM400 firmware Gallagher has tested is 2.30.1. A copy of this firmware is located at `'Utilities\Schlage\AD Firmware\AD.A.130'`.

To upgrade the firmware of the PIM400, please refer to the procedure in the "Device Firmware Update" section of the *Schlage Utility Software User Guide*.

It is now possible to configure the Schlage PIM400 and Schlage AD series Hardware from within Command Centre.

From in Command Centre, set the values for **RS485 Address**, **Low Door** and **High Door** to align with the Schlage PIM400 configuration.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.security.gallagher.com/knowledge-hub/configuration-client/integrated-systems/schlage-lock-interface/schlage-device-setup-and-configuration.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
