> For the complete documentation index, see [llms.txt](https://help.security.gallagher.com/knowledge-hub/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.security.gallagher.com/knowledge-hub/configuration-client/integrated-systems/schlage-lock-interface/creating-a-schlage-pim-panel-interface-module.md).

# Creating a Schlage PIM (Panel Interface Module)

### Introduction

This procedure describes how to create a Schlage PIM (Panel Interface Module) in Gallagher Command Centre.

**Note:** AD30X locks should be assigned to a PIM in Command Centre although an AD30X lock is not physically connected/wired to a PIM400 (one AD30X lock per PIM), and the RS-485 Address, Low Door and High Door fields on the Setup Page of the PIM properties should always use the same value as the RS485 Address configured on SUS > Lock Properties > Edit screen in the HHD.

For example, when the RS485 Address of a AD30X lock is set to 5 in the HHD, the Setup page of the Schlage PIM to which the lock, (i.e. the corresponding Schlage Door) is assigned would look like something below.

![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-9d78bd5ca1481f92eb69eafe86480a1cf82ab4fe%2Fschlagepim_setup_tab_example.png?alt=media)

### Configuration

To configure a Schlage PIM, perform the following procedures in Gallagher Configuration Client:

1. Click **Configure** from the menu bar, then **Hardware**.

   The **Hardware** List Window opens (in [tree view](https://help.security.gallagher.com/knowledge-hub/configuration-client/glossary-of-terms.md#tree-view)).
2. **Right click** and select **New\...Schlage Devices** > **Schlage PIM.**

   By default the **General** tab displays.
3. Complete the fields as required.

   For further detail see [General tab](https://help.security.gallagher.com/knowledge-hub/configuration-client/introduction-to-command-centre/knowing-your-way-around/generic-properties-configuration/general-tab.md).
4. Click the **Event Response** tab, and configure as required.

   For further detail see [Event Response tab](https://help.security.gallagher.com/knowledge-hub/configuration-client/introduction-to-command-centre/knowing-your-way-around/generic-properties-configuration/event-response-tab.md).
5. Click the **Alarm Instructions** tab, and configure as required.

   For further detail see [Alarm Instructions tab](https://help.security.gallagher.com/knowledge-hub/configuration-client/introduction-to-command-centre/knowing-your-way-around/generic-properties-configuration/alarm-instructions-tab.md).
6. Click each tab in turn to configure the Schlage PIM:

<details>

<summary>Connections tab</summary>

1. Click the **Connections** tab.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-bea3dc8b48ad0aa9f31b228ee810b77afab37a08%2Fschlagepim_connections_tab.png?alt=media)

   The three fields, (i.e. **Connected to**, **RS-485 Bus** and **RS-485 Address** ) will be populated once you assign this Schlage PIM to a Controller 6000 or 7000, which is explained later in [Assigning Devices](https://help.security.gallagher.com/knowledge-hub/configuration-client/integrated-systems/schlage-lock-interface/assigning-devices.md).

</details>

<details>

<summary>Setup tab</summary>

1. Click the **Setup** tab.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-2ba613737089f5a9e31b7322c649b8d3d8be641e%2Fschlagepim_setup_tab.png?alt=media)
2. Configure these fields as appropriate.

   <table><thead><tr><th width="162">Field</th><th>Description</th></tr></thead><tbody><tr><td>RS-485 Address</td><td>Each Schlage PIM must have it's own RS-485 address.</td></tr><tr><td>Low Door</td><td>This is the lowest RS-485 address.</td></tr><tr><td>High Door</td><td>This is the highest RS-485 address. It must be higher than the <strong>Low Door</strong> value, but no more than 16 higher than the <strong>Low Door</strong> value.</td></tr><tr><td>Wakeup</td><td><p>If you want to use the Free/Secure mode leave the <strong>Enabled</strong> option selected and apply the appropriate number of seconds (Range = 1 - 10).</p><p><strong>Note:</strong> Applying 0 seconds will automatically select the <strong>Disabled</strong> radio button and the Seconds box will become disabled.</p></td></tr></tbody></table>

   **Note:** Where there are two (or more) PIMs configured on one BUS, the Low Door - High Door ranges on those PIMs cannot overlap, (i.e. those doors cannot share RS-485 addresses). For the first PIM (say for 16 doors), set the range as 1-16, for the second PIM use 17-32. This restriction does not apply where PIMs are not sharing a BUS.

</details>

<details>

<summary>Schlage Doors tab</summary>

1. Click the **Schlage Doors** tab.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-c40e31665ad543a672b78b0c524e107cb3d10624%2Fschlagepim_doors_tab.png?alt=media)

   This screen allows Schlage Doors to be associated with the Schlage PIM.

   See [Assigning Devices](https://help.security.gallagher.com/knowledge-hub/configuration-client/integrated-systems/schlage-lock-interface/assigning-devices.md) for the procedure.

</details>

7. Click the **Cameras** tab if you want to associate a DVR Camera(s) with this Schlage PIM.

   For further details see [Cameras tab](https://help.security.gallagher.com/knowledge-hub/configuration-client/introduction-to-command-centre/knowing-your-way-around/generic-properties-configuration/cameras-tab.md).
8. Click the **Icons** tab if you want to change the Icon Set for this Schlage PIM.

   For further details regarding the **Icons** tab, see [Icons](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/server-properties/icons.md).
9. Click the **Custom Fields** tab if you want to add and assign a custom field value to this Schlage PIM.

   For further details regarding the **Custom Fields** tab, see [Custom Fields](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/server-properties/custom-fields.md).
10. Click the **Notes** tab if you want to add a note(s) about this Schlage PIM.

    For further details regarding the **Notes** tab, see [Notes](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/server-properties/notes.md).
11. Click **OK** to exit and save your changes.

    Click **Cancel** to exit without saving your changes.

    Click **Apply** to save your changes and stay in this window.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.security.gallagher.com/knowledge-hub/configuration-client/integrated-systems/schlage-lock-interface/creating-a-schlage-pim-panel-interface-module.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
