> For the complete documentation index, see [llms.txt](https://help.security.gallagher.com/knowledge-hub/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.security.gallagher.com/knowledge-hub/configuration-client/integrated-systems/salto-lock-interface/space-site-configuration/salto-lockers.md).

# Salto Lockers

### Introduction

This procedure describes how to create the access control for Lockers within the Salto application.

**Notes:**

* Salto Lockers are represented as Salto Door items in Command Centre.
* The advanced parameter FREE\_ASSIGNMENT\_LOCKER allows users to choose any locker from a number of available lockers within a Salto zone. Locker events are mapped through to Command Centre.

### Procedure

1. Select **Access points > Lockers**.

   The Lockers screen is displayed.
2. Click **Add Locker**.

   The Locker information screen is displayed.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-33f3aa9c30ec748c25bcf9bdbc9338bd5afb3dff%2Flocker.png?alt=media)
3. Type in the name of the Locker in the **Name** field.

   **Notes:**

   * Lockers are represented as Salto Door items in Command Centre, so it is recommended that you clearly identify this item, (e.g. Locker 1). Characters '@' and '(X)' should not be used in the name field.
   * The Salto Locker name must match the Command Centre name. If the names do not match, card events will not show the source and the next 'Update Access Points' will cause the Command Centre item to be deleted.
4. Type in a description for the Locker in the **Description** field, if required.

   **Note:** If a description is entered, it will not be replicated to Command Centre during an 'Update Access Points'.
5. Check that the remainder of the fields contain the required set up.

   <table><thead><tr><th width="174">Field / Checkbox</th><th>Description</th></tr></thead><tbody><tr><td>Open mode</td><td><p>This determines the electronic locks working mode.</p><p><strong>IMPORTANT:</strong> Do not change the default mode of Standard, as the other mode in the drop-down list, (i.e. Automatic opening), is not supported.<br><strong>Salto Default</strong> = Standard<br><strong>Command Centre Equivalent</strong> = Secure - Card and no PIN<br><strong>Command Centre Default</strong> = Secure - Card and No PIN</p></td></tr><tr><td>Open time</td><td>This field determines the time passed from the moment access is granted, until the electronic system locks it again.<br><strong>Salto Default</strong> = 6<br><strong>Command Centre Equivalent</strong> = Door unlock time<br><strong>Command Centre Default</strong> = 5</td></tr><tr><td>Increased open time</td><td>Defines a longer opening time. This option is designed for disabled or ‘hands full’ users. The default time value is 20 seconds. The value can be increased or decreased in the range 0 to 255 seconds. You must enable this option in the user’s profile. If extended access time is used in Command Centre, it is then used in Salto as the increased open time.<br><strong>Salto Default</strong> = 20<br><strong>Command Centre Equivalent</strong> = Extended access time<br><strong>Command Centre Default</strong> = 25</td></tr><tr><td>Audit on keys</td><td><p>Allows monitoring of when and where keys are used. You must enable this feature on both the access point and the user’s key. When this option is selected, the locker is enabled to write or stamp the audit on the key as long as the key’s memory is not full.</p><p><strong>Salto Default</strong> = Off (should be changed to ON for non-wired offline locks)</p><p><strong>Command Centre Equivalent</strong> = Automatic in Command Centre</p></td></tr><tr><td>Close locker without card</td><td>Allows a user or a group of users to secure the locker without a key. This is a useful feature for common lockers that are used by a small number of users, for example, medicine cabinets or store cupboards.</td></tr><tr><td>Admit expired keys</td><td>The locker can be configured to admit cards already expired for a certain amount of days.</td></tr></tbody></table>
6. Click **Save**.

### What happens next?

You will now need to associate a Salto zone with the Locker. Command Centre Cardholder access to the Salto zone will provide access to the Locker. Salto guest access to the Salto zone will provide access to the Locker.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.security.gallagher.com/knowledge-hub/configuration-client/integrated-systems/salto-lock-interface/space-site-configuration/salto-lockers.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
