> For the complete documentation index, see [llms.txt](https://help.security.gallagher.com/knowledge-hub/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.security.gallagher.com/knowledge-hub/configuration-client/integrated-systems/salto-lock-interface/command-centre-site-configuration/performing-overrides-on-the-salto-server.md).

# Performing Overrides on the Salto Server

### Introduction

This procedure describes how to perform an override on the Salto Server from Command Centre.

### Procedure

1. Click **Configure** from the menu bar, then **Salto**.

   The **Salto** List Window opens.
2. **Right click** on the Salto Server and select **Override…** from the drop-down menu.

   The **Status and Overrides** tab displays.
3. Click within the **Override** field and select the appropriate option from the drop-down list.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-b6ee0f7a367f5d2a12fa97cd1b461a938f428190%2Fsaltoserver_fullresync.png?alt=media)
4. Select the required override option.

   <table><thead><tr><th width="222">Override Option</th><th>Description</th></tr></thead><tbody><tr><td>Disable Communication</td><td><p>This disconnects the Salto Server from Command Centre from the Salto Space Server, and remains that way until you "Enable Communication".</p><p>Cardholders can still badge their card and get access to the Salto door, however, there are no access granted events. All access granted events are displayed after communication is re-enabled.</p></td></tr><tr><td>Enable Communication</td><td><p>The Salto Server from Command Centre re-establishes communication.</p><p>All the events which are from the period of time the "Disabled Communication" override was in place will display.</p></td></tr><tr><td>Configure Encryption</td><td><p>This allows Salto locks to read MIFARE cards that are encoded by Command Centre with Salto data. This override only needs to be performed once, after upgrading to Salto Space.</p><p>Refer to <strong>Performing a Configure Override on the Salto Server</strong> (below) for full details.</p></td></tr><tr><td>Revalidate Server Certificate</td><td><p>This override is only applicable to sites using HTTPS connection.</p><p>When the <strong>Salto ProAccess Space Configurator</strong> certificate changes, the Command Centre Salto Server loses connection to Salto Space. Applying a "Revalidate Server Certificate" override re-establishes the connection.</p><p><img src="https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-6f620ce07a3b47781535610f295e15653b7f5cfa%2Fsaltospace_usehttps.png?alt=media" alt=""></p></td></tr><tr><td>Full Re-sync</td><td><p>This override is only applicable to sites using the Salto Native Mode.</p><p>Refer to <a href="https://help.security.gallagher.com/knowledge-hub/configuration-client/integrated-systems/salto-lock-interface/command-centre-site-configuration/salto-full-re-sync.md">Salto Full Re-sync</a> for full details.</p></td></tr></tbody></table>
5. Click the **Override Now** button.

   From this screen you can see the status change as a result of the override.
6. Click the **OK** button.

### Result

The Salto Server is overridden.

**Note:** Another type of override that can be performed on the Salto Server is an "Update Access Points" override. Refer to [Updating Access Points](https://help.security.gallagher.com/knowledge-hub/configuration-client/integrated-systems/salto-lock-interface/command-centre-site-configuration/updating-access-points.md) for further information.

#### Performing a Configure Encryption Override on the Salto Server

### Introduction

The Configure Encryption override allows Salto locks to read MIFARE cards that are encoded by Command Centre with Salto data. This override only needs to be performed once, after upgrading to Salto Space.

Operators require the "Manage Keys" privilege in a division to perform an encryption override on the Salto Server. Please ensure this override is actioned before configuring or initialising any Salto Readers.

Configure Encryption overrides can only be performed on the PC that has Command Centre Server installed.

### Procedure

1. Click **Configure** from the menu bar, then **Salto**.

   The **Salto** List Window opens.
2. **Right-click** on the Salto Server and select **Properties**.

   By default the **General** tab displays.
3. Click the **Status and Overrides** tab.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-763dbaa7bd54d584ed548ae2fd726f675863d5a9%2Fsaltostatus%26overridestab_configureencryption.png?alt=media)
4. Select **Configure Encryption** from the Override drop-down menu.
5. Click the **Override Now** button.
6. Click **OK** to exit and save your changes.

   Click **Cancel** to exit without saving your changes.

   Click **Apply** to save your changes and stay in this window.
7. Any Salto doors/locks displaying the ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-011a2d8e62f263e91d070b0ed050ca7e25fcfd39%2Fupdatesymbol.png?alt=media) symbol in Salto SPACE need to be updated, and any locks that will not read cards encoded with Salto information via Gallagher Command Centre, will need to be re-initialised.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.security.gallagher.com/knowledge-hub/configuration-client/integrated-systems/salto-lock-interface/command-centre-site-configuration/performing-overrides-on-the-salto-server.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
