> For the complete documentation index, see [llms.txt](https://help.security.gallagher.com/knowledge-hub/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.security.gallagher.com/knowledge-hub/configuration-client/integrated-systems/salto-lock-interface.md).

# Salto Lock Interface

### Introduction

Command Centre supports Salto ProAccess SPACE 6.10.4.3. Command Centre no longer supports Salto HAMS For Service v12.2.2.205.

The Salto Lock Interface provides an interface between Command Centre and the Salto ProAccess SPACE 6.10.4.3 software.

SALTO are world leaders in non-wired door locking mechanisms and Gallagher provides a seamless integration to Salto Proximity MIFARE Classic, MIFARE Plus SL3 and DESFire EV1 to EV3 readers. Salto BLE readers can be accessed through Gallagher Mobile Connect.

The Gallagher Salto integration provides a single user interface for cardholder enrolment, card encoding and management of cardholder access, allowing a single card to be used for access at both Gallagher and Salto readers on site.

The Salto system incorporates online wired, online wireless, non-wired offline and wireless doors. Wired online door readers/wireless online door readers write access changes received from Command Centre to a Cardholder's card which is then used to gain access at non-wired offline and wireless doors. Non-wired offline and wireless doors are connected to the Salto Virtual Network (SVN) for continuous event monitoring.

**Salto Native Mode** facilitates secure communication between the Gallagher Command Centre and Salto Space, enhancing user functionality and improving the overall customer experience. Customers benefit from additional features, such as access during lockdown. **Key benefits of upgrading to the SALTO Native Interface include:**

* End-to-end encryption between the Gallagher Command Centre and SALTO Space.
* Enhanced user experience with additional features.

Upgrade steps for existing sites are found in section [6. Salto Server Connection](https://help.security.gallagher.com/knowledge-hub/configuration-client/integrated-systems/salto-lock-interface/space-installation-instructions/6-salto-server-connection.md).

The Salto Space installation instructions below have been updated for Native Mode since vEL9.30. **If Legacy Mode Salto Space installation instructions are required, please see older installation documents**.

***

### Licensing

The Salto Lock Interface integration is a licensed feature of the Gallagher Command Centre, and therefore the following license is required:

* 2A8953 - SALTO Integration License. Required for each SALTO Control Unit/Escutcheon/i-Locker/Energy Saving Device integrated with Command Centre.

  **Note:** If the SALTO Control Unit/Escutcheon/i-Locker/Energy Saving Device is not purchased through Gallagher, please order 2A8996.

***

### Functionality

The Salto Lock Interface provides the following functionality:

* Sharing of Cardholder, card, door and access-related data between the Command Centre and Salto systems such that installers are not required to dual configure the same item within each system and changes in either system are communicated between the systems.
* The ability for a Cardholder to use a single card to access a Command Centre door or a Salto door.
* Encoding of the card used for accessing a Command Centre door or a Salto door to be managed solely from Command Centre, (i.e. preventing any need for dual encoding of cards separately from within each system).
* Allowing a Cardholder’s access to a Salto door to be assigned or restricted from within Command Centre.
* Events from a Salto door, (e.g. Cardholder access events or low battery warnings) are transferred to and stored in the Command Centre event log. These events are configurable from Command Centre as an event only or as an alarm that is visible in the Alarm Viewer. Non-wired offline and wireless doors report events at the time a Cardholder's card is presented at an update point (wired online door).
* Using Salto's CUADAP functionality which allows a Salto Control Unit to pass Wiegand data to a third party system.

  **Note:** All cards that use this feature need to be re-encoded, so the Wiegand data gets added to the cards.
* A Salto Output number can be assigned to an Access Zone in Command Centre. When a Cardholder’s card is encoded with Salto data by Command Centre, the Salto Output numbers for any Access Zones the Cardholder is required to access are added to the card. When a Cardholder presents their card at a Salto wired reader located within a lift, the Salto Outputs for which the Cardholder has access will be activated, thus enabling the Cardholder to access one or more floors.
* Salto Door and Zone status can be viewed in Command Centre.

  **Note:** Salto Zones are merely groups of doors and hence there is no need to show them as offline.
* The following Salto online door overrides can be performed from Command Centre: Open Door, Emergency Closing, Emergency Opening and End of Emergency Opening. If required, a Command Centre operator can configure a Macro to perform an override for all doors on site (both Salto online and Command Centre doors).
* Online wireless battery monitoring. Battery low alarm raised at 20% battery level. Battery critical alarm raised at 10% battery level.
* Online ESD monitoring with window open sensor and event monitoring.
* Card update via online wireless readers reduces the need for wired update points.

***

Select the item below that you require further detail on:

![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-f30c70c9dfd07493527af00bd979539606de5d30%2Ftopiclink.png?alt=media) [Space Compatibility](https://help.security.gallagher.com/knowledge-hub/configuration-client/integrated-systems/salto-lock-interface/space-compatibility.md)

![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-f30c70c9dfd07493527af00bd979539606de5d30%2Ftopiclink.png?alt=media) [Space Installation Instructions](https://help.security.gallagher.com/knowledge-hub/configuration-client/integrated-systems/salto-lock-interface/space-installation-instructions.md)

![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-f30c70c9dfd07493527af00bd979539606de5d30%2Ftopiclink.png?alt=media) [Space Site Configuration](https://help.security.gallagher.com/knowledge-hub/configuration-client/integrated-systems/salto-lock-interface/space-site-configuration.md)

![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-f30c70c9dfd07493527af00bd979539606de5d30%2Ftopiclink.png?alt=media) [Command Centre Site Configuration](https://help.security.gallagher.com/knowledge-hub/configuration-client/integrated-systems/salto-lock-interface/command-centre-site-configuration.md)

![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-f30c70c9dfd07493527af00bd979539606de5d30%2Ftopiclink.png?alt=media) [SALTO Mobile Access Integration](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/mobile-connect/salto-mobile-access-integration.md)

![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-f30c70c9dfd07493527af00bd979539606de5d30%2Ftopiclink.png?alt=media) [Troubleshooting - Salto Lock Interface](https://help.security.gallagher.com/knowledge-hub/configuration-client/integrated-systems/salto-lock-interface/troubleshooting-salto-lock-interface.md)

![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-f30c70c9dfd07493527af00bd979539606de5d30%2Ftopiclink.png?alt=media) [Space to Command Centre Event Mapping](https://help.security.gallagher.com/knowledge-hub/configuration-client/integrated-systems/salto-lock-interface/space-to-command-centre-event-mapping.md)


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.security.gallagher.com/knowledge-hub/configuration-client/integrated-systems/salto-lock-interface.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
