> For the complete documentation index, see [llms.txt](https://help.security.gallagher.com/knowledge-hub/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.security.gallagher.com/knowledge-hub/configuration-client/integrated-systems/qr-code-readers.md).

# QR Code Readers

### Introduction

QR Code Readers can be connected to Gallagher Command Centre and configured as third party readers, for the purpose of providing access control for areas with lower security requirements, or where the access may be temporary, (e.g. access to cafeterias, meeting rooms, lockers, etc.).

This topic is separated into individual procedures to cover the whole process involved in configuring QR Code Readers to work with Gallagher Command Centre. The procedures, in the order they should be performed, are:

* Connecting and configuring a QR Code Reader
* Creating a new third party reader
* Assigning the reader to the Controller
* Configuring the Card Type

### Procedure

#### Connecting and configuring a QR Code Reader

1. Physically connect the QR Code Reader to a Gallagher Controller as a Wiegand Reader.

   For Wiegand Reader connection details, refer to the Gallagher Controller installation note.

{% columns %}
{% column width="8.333333333333332%" %}

{% endcolumn %}

{% column width="41.66666666666667%" %}

* Red – Power
* Blue – Ground
* Green – Data 0
  {% endcolumn %}

{% column width="49.99999999999999%" %}

* White – Data 1
* Orange – LED 0
* Yellow – LED 1
  {% endcolumn %}
  {% endcolumns %}

#### Creating a new third party reader

Create a new third party reader for the QR Code Reader in the Configuration Client, as follows:

2. Click **Configure** from the menu bar, then **Hardware**.

   The **Hardware** List Window opens.
3. **Right click** and select **New\...Third Party Reader**.

   By default the **General** tab displays.
4. Enter a Name and Description, and select the division for this QR Code Reader.
5. Configure the remaining tabs as required, and click the **OK** button.

#### Assigning the reader to the Controller

Assign the newly created third party reader to a Controller in the Configuration Client, as follows:

6. From the **Hardware** List Window, open the property pages for the Controller that the third party reader will be assigned to.
7. Click the **Readers** tab.
8. Assign the newly created QR Code Reader (third party reader) to the appropriate slot.

   **Note:** Only slots 1, 3, 5 or 7 can be used.
9. Click the **Card Formats** tab.
10. On the **Universal Card Format** List Window, highlight the ‘Wiegand QR Access Token’ Universal Card Format, and drag and drop it into the grid on the **Card Formats** tab of the Controller.

    **Note:** If the ‘Wiegand QR Access Token’ Universal Card Format is deleted in error, the QR reading process will not work. The UCF would need to be re-created as shown below:

    ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-ec0d0ddf4ca72287cbe46e8bacf53e611d2e1790%2Fqraccesstoken_formattab.png?alt=media)
11. Click the **OK** button.

    The QR Code Reader is now set up to read QR Codes created by the Gallagher system and the Controller can make access decisions relative to the cardholders access.

#### Configuring the Card Type

The QR code is data derived from the cardholders "Card number and Facility code". This needs to be set up as an object in the Card type configuration, in the Configuration Client, as follows:

12. Click **Configure** from the menu bar, then **Card Types**.

    The **Card Type** List Window opens.
13. **Right click** on the Card Type you want to add the QR Code to, and select **Edit Card Layout**.

    The Card Editor window displays.

    **Note:** QR Codes can only be applied to a Card Type configured with Decimal card numbers, (i.e. "Decimal" is selected for the **Format** on the Card Type’s **Setup** tab).
14. Select **New QR Code Access Token Object** ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-88754b481dd74d3019f18695eee5bfd57e52a4e9%2Fvisitbadge.png?alt=media) from the drop-down list of object types.

    ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-1688296012aeec87774d1d7eb56046e0683ca878%2Fqrcode_cardeditorwindow.png?alt=media)

    A QR barcode image displays with placeholders around it.

    ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-65c938069274be99dab536e16a6feeb1a202a583%2Fqrcodeaccesstoken.png?alt=media)
15. Resize and reposition the barcode as required. See [Expanding an Object Box](https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/card-layouts-designing-printing-encoding/designing-card-layouts/working-with-objects/card-type-objects/expanding-an-object-box.md) and/or [Moving Objects](https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/card-layouts-designing-printing-encoding/designing-card-layouts/working-with-objects/card-type-objects/moving-objects.md) for the procedure.
16. Make further modifications to the card, (e.g. add a background or another object), if necessary. See [Designing Card Layouts](https://help.security.gallagher.com/knowledge-hub/configuration-client/licensable-features/card-layouts-designing-printing-encoding/designing-card-layouts.md) for further details.
17. Click the **OK** button.

    The Card Editor window closes.

Now when this card type is assigned to a Cardholder and Printed/Copied, this QR code will act as an access code for the configured QR readers for as long as the Cardholders access is configured, (e.g. active card, access group membership, etc.).

**Note:** This is a low security option. There is nothing to prevent this code being copied and distributed multiple times.

If the desire is to provide temporary access, then limiting the time is dependant on Card Expiry and or Access Group expiry against specific Cardholders.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.security.gallagher.com/knowledge-hub/configuration-client/integrated-systems/qr-code-readers.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
