> For the complete documentation index, see [llms.txt](https://help.security.gallagher.com/knowledge-hub/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.security.gallagher.com/knowledge-hub/configuration-client/integrated-systems/nedap-readers/nedap-booster-desfire-feature/nedap-booster-configuration.md).

# Nedap Booster configuration

### Introduction

To enable your Nedap Boosters to read MIFARE DESFire cards, you must have them read a configuration card. This card is encoded with configuration instructions for a Nedap Booster. When a Nedap Booster reads this card, it reads and applies the configuration to enable it to read DESFire cards.

### Prerequisites

For this procedure you will need:

* the Smartcard Booster Config installer file **'CfgSmartcard-install.msi'** located in the `'Utilities\Nedap\Transit Reader'` folder of the Command Centre installation files.
* the configuration template file provided

  **Note:** You must restrict access to the **'Classic\_DESFire.sbcf'** file. This file contains sensitive configuration data, so must be stored securely.
* access to the Card Type layout properties (in Configuration Client)
* a blank MIFARE Classic card (for configuration)
* a USB MIFARE card encoder (ensure the relevant driver is installed)
* the Nedap Boosters you wish to configure

### Procedure

To configure the Nedap Booster configuration card, perform the following procedure:

1. Install the utility by running the installation file **'CfgSmartcard-install.msi'**.

   Follow the installation steps to install the Smartcard Booster Config utility.
2. If 'Launch Smartcard Booster Config' is selected when you finish installation, the utility opens. Otherwise, open 'Smartcard Booster Config' from the **Start** menu.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-2f39720f6f0bdf93fca032b80ae3d083aa7fa305%2Fsmartcardboosterconfig_screen1.png?alt=media)
3. Ensure your USB MIFARE card encoder is connected to your PC.
4. Click the ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-cf91410c69c7a0c1b126335e6f15ccb2253498df%2Fselectencoderbutton.png?alt=media) button and select your USB MIFARE card encoder, then click **OK**.
5. From the menu bar, select **File** > **Open…**

   The Open window displays.
6. Browse to and select the **'Classic\_DESFire.sbcf'** file and click **Open**.

   The utility loads the configuration.
7. Under 'Card read settings', click the **DESFIRE** tab.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-ecc8c27c2da9d919d09f198fc08952b43cb1375f%2Fsmartcardboosterconfig_desfire.png?alt=media)
8. In the **Application ID** field, enter the Application ID from the DESFire object in your DESFire Card Type’s card layout.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-fd2ac4ca52fb813d11b88b39ba2292f1bce0602f%2Fapplicationidfield.png?alt=media)
9. The **Read key** is split into two parts. Part 1 is the first half (first 16 characters) of the AES Key from the DESFire object in your DESFire Card Type’s card layout. Part 2 is the other half.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-e6d5f6b6dda5aefd5e981029687543abe3eadafc%2Faesreadkeyfield.png?alt=media)
10. Place your blank MIFARE Classic card on the USB MIFARE card encoder.
11. Click the ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-e713251cb6726bb19840d76f44cbd5e9a6746110%2Fpencilwritebutton.png?alt=media) button to write the configuration to the card, and click **Yes** in the pop-up window.
12. For each Nedap Booster you wish to enable DESFire compatibility for, place the configuration card inside the Nedap Booster as you would with a regular card.
13. Press the button on the Nedap Booster device to load configuration from the card to the Nedap Booster device.
14. To verify that you have enabled MIFARE DESFire on the Nedap Booster:
    1. Assign a DESFire card of the required Card Type to a Cardholder.
    2. Encode a DESFire card with this card.
    3. Check that the card can be used with the Nedap Booster to grant access to an Access Zone at a TRANSIT reader.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.security.gallagher.com/knowledge-hub/configuration-client/integrated-systems/nedap-readers/nedap-booster-desfire-feature/nedap-booster-configuration.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
