> For the complete documentation index, see [llms.txt](https://help.security.gallagher.com/knowledge-hub/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.security.gallagher.com/knowledge-hub/configuration-client/integrated-systems/nedap-readers/nedap-anpr-lumo-feature/first-time-configuration.md).

# First time configuration

If you do not have any licence plate cards configured already, perform the following procedure to set up your Nedap ANPR Lumo cameras and create licence plate cards:

![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-f30c70c9dfd07493527af00bd979539606de5d30%2Ftopiclink.png?alt=media) [Nedap ANPR Lumo reader installation](https://help.security.gallagher.com/knowledge-hub/configuration-client/integrated-systems/nedap-readers/nedap-anpr-lumo-feature/first-time-configuration.md)

![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-f30c70c9dfd07493527af00bd979539606de5d30%2Ftopiclink.png?alt=media) [Configuration in Command Centre](https://help.security.gallagher.com/knowledge-hub/configuration-client/integrated-systems/nedap-readers/nedap-anpr-lumo-feature/first-time-configuration.md)

![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-f30c70c9dfd07493527af00bd979539606de5d30%2Ftopiclink.png?alt=media) [Nedap ANPR Lumo camera configuration in a web browser](https://help.security.gallagher.com/knowledge-hub/configuration-client/integrated-systems/nedap-readers/nedap-anpr-lumo-feature/first-time-configuration.md)

#### Nedap ANPR Lumo reader installation

To install a **Nedap ANPR Lumo** reader so it is ready to communicate with the Gallagher Controller, connect it to the Controller's 8R Module, or HBUS Wiegand Module as follows:

<table><thead><tr><th width="264">Wire the Nedap ANPR Lumo...</th><th width="277">to the Controller 8R/4R Module...</th><th>to the HBUS Wiegand Module...</th></tr></thead><tbody><tr><td>White wire (Wiegand Data - 0)</td><td>R1-in or R3-in</td><td>R1/R2 Data 0</td></tr><tr><td>Brown wire (Wiegand Data - 1)</td><td>R2-in or R4-in</td><td>R1/R2 Data 1</td></tr><tr><td>Purple wire (Wiegand GND)</td><td>V out -</td><td>GND</td></tr></tbody></table>

*For example:*

<table><thead><tr><th width="191">Controller 8R/4R Module</th><th width="44"></th><th width="307"></th><th>HBUS Wiegand Module</th></tr></thead><tbody><tr><td><img src="https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-7643b9a0c76833c045bc881cf8763594a57b3f86%2Fanprlumowiring_1.png?alt=media" alt=""></td><td>Or,</td><td><img src="https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-2f96e08e4b0f7a2fd4854150350f94725ab6cfd5%2Fanprlumowiring_2.png?alt=media" alt=""></td><td><img src="https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-65be5519c247a3278222eb0a27fd12e0b9c0eb35%2Fanprlumowiring_3.png?alt=media" alt=""></td></tr></tbody></table>

#### Configuration in Command Centre

1. In Gallagher Configuration Client, configure a Third Party Reader for each Nedap ANPR Lumo camera.

   **Note:** The [Creating Readers](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/hardware/creating-readers.md) topic provides detailed instructions for creating a third party reader.

   On the **Type** tab of the Reader properties, add a card format to the third party reader from the **Format** drop-down list (NedapANPR).

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-e4545b54f11dfd07316a510b772f5a287b598e34%2Fthirdpartyreader_typetab_nedapanpr.png?alt=media)
2. Open the properties of each Controller that has a Nedap ANPR Lumo camera connected to it, and click the **Readers** tab.
3. Assign the third party reader to the appropriate slot, depending on how you wired it to the Controller, or HBUS Wiegand Reader port.
4. Click **OK**.
5. Assign the Third Party Readers to the appropriate Door items' **Entry Zone** tabs.

   Refer to Creating Doors for further detail.
6. Click **Configure** from the menu bar, then **Card Types**.

   The Card Type List Window opens.
7. From the Card Type list window, select **New…Card Type**.
8. Enter a **Name**, (e.g. 'Nedap ANPR licence plate') and **Description**, then click the **Setup** tab.
9. Configure the Card Type with the following settings:
   * **Region Code:** A
   * **Facility Code:** 00006
   * **Format:** Text
10. Configure the remaining settings as required.

    Refer to [Setting up Card Types](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/card-types/setting-up-card-types.md) for full instructions.
11. Open the properties of each Cardholder that requires a licence plate card for gaining access with a vehicle.
12. Click the **Cards** tab, and assign a new card. Select the licence plate Card Type you have created (in Steps 12-15) and enter the required licence plate number as the card Number. Card numbers are case-sensitive; enter the licence plate in all capital letters.
13. Click **Configure** from the menu bar, then **Universal Card Format**.

    The Universal Card Format List Window opens.
14. Create a new Universal Card Format for each tag format you will be using.

    Refer to [Adding a new Universal Card Format](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/universal-card-format/adding-a-new-universal-card-format.md) topic for detailed instructions for configuring a Universal Card Format (UCF).
15. On the **Format** tab of the UCF, select the **Wiegand** radio button and ensure the following fields are populated as follows:

    <table><thead><tr><th width="171">Field</th><th>Value</th></tr></thead><tbody><tr><td><strong>Number of Bits:</strong></td><td>64</td></tr><tr><td><strong>Bits in Facility Code:</strong></td><td>4</td></tr><tr><td><strong>First Bit of Facility Code:</strong></td><td>1</td></tr><tr><td><strong>Bits in Card Number:</strong></td><td>60</td></tr><tr><td><strong>First Bit of Card Number:</strong></td><td>5</td></tr><tr><td><strong>Facility Code:</strong></td><td>A00006</td></tr></tbody></table>
16. Create cards for each of the cardholders and/or vehicles as required.

    See [Adding a Card to a Cardholder](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-management/cardholders/adding-a-card-to-a-cardholder.md) for the complete procedure.

    **Note:** When using ANPR Readers, ensure that the Card Type selected uses the Facility Code A00006 as entered into the new Universal Card Format you created earlier.

#### Nedap ANPR Lumo camera configuration in a web browser

1. Access your Nedap ANPR Lumo camera so you can configure it in your web browser as follows:
   1. Enter the camera's IP address into your web browser (Internet Explorer is not supported). The default IP address is 192.168.3.15
   2. Enter the Username 'admin' and Password 'secret' to log in.
   3. If your camera's IP address is still the default, you should change it if you have more than one Nedap ANPR Lumo camera.
2. Enable the 'Wiegand64' READ action on the camera, so the camera communicates to the Gallagher Controller, as follows:
   1. In the camera's settings in your web browser, go to **CONFIGURATION** and click the **ACTIONS** tab.
   2. Expand the READ actions and click **ADD**.
   3. In the ADD/EDIT ACTION window, select **WIEGAND64**.
   4. Ensure it is set to enabled, then click **SAVE**.
3. Set the appropriate classifier for your country/region so the camera reads licence plates correctly, as follows:
   1. In the camera's settings in your web browser, go to **SYSTEM SETTINGS** and click the **REGION** tab.
   2. 'SET' the appropriate classifier for your country/region from the **REGION LIST**.

      ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-7e46265e2326ce8f67b53553151cf7e002aebd64%2Fanprlumo_systemsettings_regiontab.png?alt=media)
4. Save your Nedap ANPR Lumo camera’s configuration as follows:
   1. In the camera's settings in your web browser, go to **SYSTEM SETTINGS** and click the **SYSTEM** tab.
   2. Select **SETUP SERIAL** under 'System Management'.

      The SETUP SERIAL dialog displays.

      ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-02ea598499cecf22e68e2a2e511c74967a5804ba%2Fanprlumo_systemsettings_setupserial.png?alt=media)
   3. Ensure **BASIC** is selected (older ANPRs do not have the SETUP serial).
   4. Click the **APPLY** button.

      The SETUP SERIAL dialog closes.
   5. Click the **SAVE CONFIGURATION** button.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.security.gallagher.com/knowledge-hub/configuration-client/integrated-systems/nedap-readers/nedap-anpr-lumo-feature/first-time-configuration.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
