> For the complete documentation index, see [llms.txt](https://help.security.gallagher.com/knowledge-hub/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.security.gallagher.com/knowledge-hub/configuration-client/integrated-systems/morpho-biometric-integration/installing-morphoaccess-readers/configuring-a-biometric-reader/configuring-morpho-readers-using-mbta-application.md).

# Configuring Morpho Readers using MBTA application

**Note:** MorphoBioToolbox (MBTB) has been renamed Morpho Biometric Terminal Administrator (MBTA).

### Before you begin

The following components must also be installed on your computer prior to Morpho Biometric Terminal Administrator installation:

* Microsoft Visual C++ 2022 Redistributable Package located `‘Utilities\Morpho\Microsoft Redistributables\vc14redist’` folder of the Command Centre installation files.
* Locate and run **VC\_redist.x64**
* Locate and run **ndp48-web**.NET Framework 4.8 located `‘Utilities\Morpho\dotNet Framework’` folder of the Command Centre installation files.

#### Morpho Biometric Terminal Administrator installation

1. Copy the executable **MBTA (Terminal Administrator).exe** from the `‘Utilities\Morpho\Morpho Biometric Terminal Administrator (MBTA)’` folder to an arbitrary directory on your local hard drive, and execute it. The Welcome screen of the Morpho Biometric Terminal Administrator Setup Wizard displays.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-9f794d2399527c089f8529d6ad468b5b037e1eb8%2Fmbtasetup.png?alt=media)
2. Click the **Next** button.

   The License Agreement screen displays.
3. Click the **I Agree** button.

   The Choose Install Location screen displays.
4. Choose the **Destination Folder** of MBTA installation, and click the **Install** button to start the proper installation.

   The Completion screen displays when the product is successfully installed.
5. Click the **Finish** button.

   **Morpho Biometric Terminal Administrator configuration**

   **Note:** Skip steps 7 to 10 if your device is unlocked. Any Morpho readers with a serial number greater than **2242xxxxxxxxxx** will have 'On-demand Security state' enabled out of the box (must use MBTB v4.6.12 or later for this to work).
6. Double-click the **MBTA** **icon** ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-8e58c4243562ea73aca37dcf8d7daedd6dba8dde%2Fmbtaicon.png?alt=media) on your desktop.
7. Type in the IP address, click on the TLS Configuration **Factory** radio button and click the **Connection** button.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-5c7bef430be6ea4309bad73ec0c70983cd422c3b%2Fmbta1a.png?alt=media)

   **Note:** When the device is in Enforced Security state, the security state Enforced security enabled is displayed.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-296f6bbc59e84bf42dd2660b191065e7e23a592c%2Fmbta1b.png?alt=media)
8. Click the **Tools** icon.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-ade10bc329d1fb9d755e77efe907ce22ef71b417%2Fmbta1.png?alt=media)
9. Only one button is available in the **Diagnostic** section, (i.e. Enable On-demand Security).

   The purpose of this button is to enable the unsecured communication (TCP) on the default port 11010. After clicking this button, the below notice appears:

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-cef140e4336333ed105d5329f7295ebd49173848%2Fmbta1c.png?alt=media)
10. Once you have read the important notice carefully, tick the **I have read and agree** checkbox and click the **Enable On-demand Security** button. This message will confirm that your reader has been correctly unsecured:

    ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-889ff3e150a10fa4b82f7c3f6cc25d0e2f44b95b%2Fmbta3.png?alt=media)

    Now your reader is unsecured and you will be able to connect to it on port 11010.
11. Click on the the **Network and Secure Communication** button on the left-hand side, type in the IP address of your reader, for the TLS Configuration click **None** and click the **Connection** button.

    ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-c4503b40534ac3ee665e2203d06d77c8348411f3%2Fmbta4.png?alt=media)
12. Modify the IP address of the reader. Click the **Communication Configuration** tab and modify the IP address settings as illustrated below:

    ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-f268c7862274dafeac2ddf962163dacc77bb2a3a%2Fmbta5.png?alt=media)

    **Note:** Set the **Preferred DNS** and **Alternate DNS** as above by default (you cannot leave the 0.0.0.0 value).
13. Click the **Write** button to validate the new IP settings; it will disconnect the device.

    In order to reconnect it, modify the IP settings of your current machine or connect the device on your final network and connect it from a machine connected to this network.
14. Click the **Device Settings** button, and then the **Date and Time** tab.

    Set the correct time and Time zone for your site, click the **Write** button.

    ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-0af0c1c7b05b58560ad5fd234e0d6c7b66a8e800%2Fmbta6.png?alt=media)

    The message *"Date and time settings written successfully to device"* will appear. Click **OK**.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.security.gallagher.com/knowledge-hub/configuration-client/integrated-systems/morpho-biometric-integration/installing-morphoaccess-readers/configuring-a-biometric-reader/configuring-morpho-readers-using-mbta-application.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
