> For the complete documentation index, see [llms.txt](https://help.security.gallagher.com/knowledge-hub/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.security.gallagher.com/knowledge-hub/configuration-client/integrated-systems/aperio-integration/aperio-site-configuration/pairing-the-aperio-locks.md).

# Pairing the Aperio locks

### Introduction

The number of locks/readers that the communication hubs can be paired with depends on the version of the communication hub, as follows:

<table><thead><tr><th width="184">Version of hub</th><th>can be paired with...</th></tr></thead><tbody><tr><td>AH30</td><td>a combination of up to 8 locks/readers.</td></tr><tr><td>AH20</td><td>one lock/reader.</td></tr></tbody></table>

**Note:** Aperio R100 locks are only supported with AH20 hubs.

**IMPORTANT:** No more than 32 Aperio Doors can be assigned to a Controller 7000, 20 per Controller 6000, or 16 per Controller 7000 Single Door. With no more than 16 Aperio Doors on a single Bus.

### Procedure

1. Position the hub LED to face the lock/reader.
2. **Right-click** and select **Communication Hub** > **Pair with lock or sensor**.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-8322e9ace54756dcfeadba3007799fa5001b06b3%2Faperio_pairwithlock.png?alt=media)

   The pairing process starts.
3. Wake up the lock by pressing any button or presenting any card credential that can be read by the lock or engaging the magnet for the door position sensor.

   The communication hub pairs with the lock and indicates with alternating yellow and green flash.
4. When the lock has flashed green, click Done to see the pairing result.

   **Note:** The communication hub LED is constant yellow and indicates successful pairing with a green flash.
5. Repeat the pairing for all communication hubs and locks/readers within reach of the USB Radio Dongle.
6. Once the locks are paired with the hub, they will show in the PAP software with their respective MAC addresses and the assigned EAC address.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-02d60e3d16b1395b4c506da55d65ebff7de17071%2Faperio_lockeacaddresses.png?alt=media)

   **Note:** Pairing might fail because of different reasons, most common being the hub and the lock having different radio channels configured. Refer to [Configuring the Radio Channels](https://help.security.gallagher.com/knowledge-hub/configuration-client/integrated-systems/aperio-integration/aperio-site-configuration/configuring-the-radio-channels.md) for details on how to check and configure the channels. Refer to [Troubleshooting](https://help.security.gallagher.com/knowledge-hub/configuration-client/integrated-systems/aperio-integration/troubleshooting-aperio-integration.md) for any other reasons.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.security.gallagher.com/knowledge-hub/configuration-client/integrated-systems/aperio-integration/aperio-site-configuration/pairing-the-aperio-locks.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
