> For the complete documentation index, see [llms.txt](https://help.security.gallagher.com/knowledge-hub/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.security.gallagher.com/knowledge-hub/configuration-client/integrated-systems/aperio-integration/aperio-site-configuration/configuring-the-radio-channels.md).

# Configuring the Radio Channels

### Introduction

Aperio Hubs and Locks/Readers communicate with each other using a pre- configured frequency from within the 2.4GHz band. Each Aperio device is factory set to 3 default radio channels based on the region of manufacture.

Aperio Hub and lock devices manufactured from USA are set to 11, 16 and 25.

Aperio Hub and lock devices manufactured from Europe/Asia/Australia are set to 11, 16 and 26.

The wireless signal will communicate using one of the chosen channels at any one time. If the active communication channel encounter external wireless interference during operation, then the Aperio Lock/Reader and Hub pair will change to the next available pre-configured radio channel frequency.

If all configured channels encounter interference, then the lock and hub pair will continue to search and change channels until a channel becomes available, or the batteries of the lock/reader become depleted.

Changing the Aperio radio channels will be necessary if you experience interference between communication hubs in close proximity of each other or from external devices, (i.e. Data Access Points), using the open 2.4GHz radio channel frequency band.

It is highly recommended that the chosen Aperio frequencies are managed to ensure they differ from the frequencies adopted by other wireless devices.

{% hint style="danger" %}
**Recommendation**

* Before configuring the Aperio radio channels on a site, it is highly recommended to perform a site survey to analyse the 2.4 GHz radio channel frequency band from external activity. This will identify the free channels that can then be applied to Aperio devices.
* Any wireless transmitting devices subsequently introduced into the environment should then be included with future site surveys.

Steps:

1. Check 2.4 GHz band for possible conflicting Wi-Fi activity using the inSSIDer.exe application (downloadable freeware [https://inssider.informer.com](http://inssider.informer.com))
2. Detect the channels with low/least activity. The following example detects 32 separate wireless Access Points using their factory default radio channel frequency:\
   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-8bc6c7f3a9eef8e10bcd7941172a7631405586b8%2Faperio_radiofrequency.png?alt=media)
   {% endhint %}

### Procedure

**Note:** When using the Aperio Dongle to manage lock and hub radio channel frequencies, always change the radio channel frequency in the locks/Readers before changing in the communication hub. (If the lock and Hub frequencies become miss aligned to a point where the lock is no longer communicating with the hub, then it is possible to connect a micro USB cable to the Aperio lock/reader (V3 only) to re-configure the Lock/Reader radio channel frequency from the PAP SW).

1. Hover over Lock/Sensor and click **Change Radio Channels...**

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-b863a759046ba8d814b8de7ba5af75664f919209%2Fpaplockchannelconfiguration1.png?alt=media)

   The Change Radio Channels dialog displays.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-0960a5b41ca398eb3af21e6f8ea6c3197753869d%2Fpaplock_hubchannelconfiguration2.png?alt=media)
2. Select the radio channel(s) and click **OK**.

   **Notes:**

   * Deselect one or several of the used channels to make a new selection of channels.
   * Refer to the diagram shown at the end of Step 5 to determine the appropriate frequency channel to assign to each Lock/Hub.
3. Click **OK** on the pop-up confirmation message that displays.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-fd6fd0aa88d68024b894b22cd1221ab9bd0f2cc6%2Fdeviceupdateresult.png?alt=media)
4. Repeat this procedure for all locks/readers connected to the current communication hub.

   **Note:** All locks/readers should use the same three channels in order to create a more stable radio connection. Communication problems occur more likely between closely installed communication hubs than between closely installed locks /sensors paired with one hub.

   During the configuration process, when the channels do not match between the hub and the lock, it will show a channel conflict in the PAP software. This will go away once the same channels have been set on the hub.
5. Finally, change the radio channel for the communication hub, as follows:

   1. **Right-click** and select **Communication Hub** > **Change Radio Channels**.
   2. Unselect any of the three currently used channels to be able to select the same radio channels as for the lock/reader.
   3. Click **OK**.

   ![](https://3000903572-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfCvaxj3suxNBzdwQndVT%2Fuploads%2Fgit-blob-959a89989d1d20cbded28f8238c6813956e19671%2Flock_hubfrequencychannels_v830.png?alt=media)


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.security.gallagher.com/knowledge-hub/configuration-client/integrated-systems/aperio-integration/aperio-site-configuration/configuring-the-radio-channels.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
