> For the complete documentation index, see [llms.txt](https://help.security.gallagher.com/knowledge-hub/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.security.gallagher.com/knowledge-hub/configuration-client/glossary-of-terms.md).

# Glossary of Terms

## Access Control

Restriction of entry or exit to access zones or elevator levels based upon specific criteria.

## Access Criteria

The parameters which determine the access groups or individuals who are allowed access to an access zone or elevator level during specified times of the day.

## Access Denied

The Cardholder does not have access to an access zone or elevator level.

## Access Group

A group of cardholders with identical access criteria. An Access Group also has privileges other than access, including the ability to escort visitors and to do manual overrides. These can be found on the Access Groups Privileges tab in Command Centre.

## Access Mode

The level of access restriction applying to an access zone at a certain time of day, (e.g. out of hours access mode may be 'Card plus PIN', and during work hours it may be 'Free Access').

## Access Mode Change Event

This is an 'Access Zone state change' event and indicates an Access Zone has changed state. The state has two parts, the 'Access Mode' can be 'Free', 'Secure', 'Code or Card' or 'Dual-auth'; the PINs mode can be 'No PIN', '4 digit PIN' or '6 digit PIN'.

## Access Point

Any point of entry or exit, such as an office door or car-park barrier arm which controls entry to an access zone.

## Access Rights

Access rights determine the access zones and elevator levels to which a cardholder is allowed access. Access rights are assigned to Access Groups, and cardholders acquire access rights by joining Access Groups.

## Access Zone

A single area within a site which has controlled points of entry or exit. There may be several controlled entry or access points into an access zone.

## Access Zone Group

Individual Access Zones can be associated with a Master Zone so they become members of an Access Zone Group. Grouping Access Zones allows anti-passback to be applied to the group rather than individual zones.

## Action Plan

An Action Plan defines what is going to happen when an event in the system occurs.

## Alarm

Some activity taking place on your site which creates an entry in the Alarm Viewer window.

## Alarm Escalation

Configurable setting so that if an alarm is not acknowledged within the set time, the alarm will automatically escalate in priority.

## Alarm Flooding

Alarm Flooding occurs when the same alarm is generated numerous times and fills up the Alarm Viewer window. Command Centre allows these flood alarms to be summarised.

## Alarm Instruction

A simple set of textual instructions which display when an operator views the details of an alarm.

## Alarm State

The state of an alarm associated with an access zone. The alarm state may be 'set', 'unset', 'user1' or 'user2'.

## Alarm Type

A category of alarm.

## Alarm Zone

A grouping (normally geographical) of alarm points that are set and unset (or in user defined states) at the same times.

## Alarm Zone State Change

This is an 'Alarm Zone state change' event and indicates that an Alarm Zone has been armed, disarmed or put into one of the other states.

## Alarm Zone State Change Failed

Indicates an Alarm Zone State Change did not initiate and the Alarm Zone state has not changed.

## Anti-Passback

The prevention of a cardholder from re-entering an access zone if they have not made a valid exit from that zone. Anti-passback is designed to prevent a cardholder 'passing' their credential 'back' to another person to allow them access into the zone at a later time.

## Anti-Passback violation

The condition where the system has detected that a credential passback has occurred, (i.e. a cardholder has attempted to enter an Access Zone, or Access Zone Group, when they are already recorded as within it).

## Anti-tailgating

Anti-tailgating means the ability to deny access through a controlled door when the current location of the cardholder is not within the area from which they are attempting to gain entry.

## Anti-tailgating violation

The condition where the system has detected that a cardholder has tailgated, (i.e. a cardholder has attempted to enter an Access Zone when they are currently recorded as outside the Access Zone, or Access Zone Group, from which they are entering).

## ARC

Alarm Receiving Centre. Usually a separate company used to receive and action alarms from an Intruder Alarm System (IAS) for use out of normal working hours.

## Authorised Cardholder

A person who is authorised to exist in the system as a valid cardholder.

## Auto-forgive

Allows an authorised cardholder to re-enter an anti-passback zone after the time set, even though they have not made a valid exit from that zone. The Auto-forgive time starts from the time of valid entry, (i.e. if set to 3 minutes and a cardholder presents their credential after 3 minutes from the original valid entry, they will be allowed back in the zone). See also 'Anti-Passback'.

## Automatic Lock Type

When a Door is configured as an Automatic Lock the lock relay will always be activated for the user configured time. This time is set by the use of the "Door unlock time" option.

## Backup

The systems working data can be backed up to a file. This can be done while the system is online and operators are logged in.

## Camera (Digital)

The Digital Camera is an intelligent, remote imaging surveillance device that performs such functions as motion detection and capturing and compressing images.

## Card

Any form of identifying token, such as a proximity token, mag-stripe card, insertion key, etc.

## Card Activity

Use of cards within a Command Centre site to gain access through doors. Card Activity is recognised by the generation of events with the "Card Event" event group.

## Card Expiry

The disabling of a card within the Command Centre system such that it may no longer be used to gain access.

## Card Swipe Timeout

Maximum time allowed between card swipes. Applies for dual authorisation, escort, double-card overrides or any situation requiring dual card swipes.

This timeout also applies to the time between pressing a function key on a keypad reader, (i.e. Arm, Mode, F1 or F2) and badging a card for a local override.

## Card Trace

A message and/or alarm is generated each time a specific card is presented to a Reader.

## Cardholder

Any person, vehicle or other identity issued with an access control token.

## Challenge

The Challenge feature allows a Command Centre operator to contest Cardholders as they attempt to gain access through a Door, and either grant or deny access.

## Closed

The contacts on an Input are closed. The Input is 'inactive'.

## Confirmed Alarms

This uses the "Escalate if two events from different points in same zone within x seconds" feature on the **Armed** tab of the Action Plan. See [Action Plans](https://help.security.gallagher.com/knowledge-hub/configuration-client/site-installation/action-plans.md) for further explanation of escalated alarms.

When a second alarm point is triggered within the same zone within the timeout, the first alarm has been confirmed by the second, which initiates a Contact ID notification using the "139 - Intrusion Verifier" code for the second event instead of the usual code, (i.e. any of the 130 to 138 codes). The first event uses a Contact ID code between 130 and 138 and the second event must be in the same Event Group as the first event.

## Contact ID

Contact ID is a DTMF (Dual Tone Multi-Frequency) protocol for transmitting event/alarm occurrences to remote alarm monitoring stations over standard telephone lines.

## Controller 6000

The Controller 6000, of which there are six variants, (i.e. Standard, Starter Kit, 2-Door, High Sec 2-Door, Enhanced and High Sec), is the central field controller for the Command Centre system. It is a processing board for an intruder alarm and access control system. All variants can operate on their own, or can have an optional Reader Module connected.

The Controller 6000 authenticates user access, logs it and carries out the required function, (e.g. opens the corresponding door). It is an Ethernet attached device which connects to a server, however it can operate autonomously.

The Controller 6000 has two RS-485 connections. Each connection may be individually configured to support HBUS, Sensor, Aperio, Schlage or OSDP communications.

## Controller 7000 Single Door

The Controller 7000 Single Door, of which there are four variants, (i.e. 'RS485', 'Wiegand', 'PoE+, RS485' and 'PoE+, Wiegand'), is a processing board for an intruder alarm and access control system that can control a single door.

## Count Zone

An Access Zone, or Access Zone Group, that the system must count cardholder entries into and exits from is known as a count zone.

## Crypt Seed

The Crypt Seed number is used for the encryption/decryption of cards and PINs, and is supplied by Gallagher Group Limited.

## Database Recovery Code

The Database Recovery Code is backed up and saved in a secure location during Command Centre installation. It protects the data stored in the Command Centre database, (e.g. encryption keys and user codes) and is required in the case of disaster recovery or when moving databases to a new server.

**Note:** Losing the recovery code prevents you from restoring your database in either of these cases.

## Day Category

Day categories are assigned to days of the year, (e.g. Monday to Friday could be the "Weekday" category, and Statutory holidays could be the "Public Holiday" category). Day categories are then assigned to Schedules, so that the scheduled system behaviour occurs at the specified time on the day category type, (e.g. Monday, Weekday, Public Holiday).

## Device

Devices include door readers and other interface hardware. Devices send information to the Controller and act upon information sent from the Controller.

## Device Number

A unique code which identifies each device to the Controller, allowing it to 'address' messages to each.

## Dialect

A combination of a language and sub-language. For instance, English (New Zealand) and English (United States) are dialects of the English language.

## Digital Camera

The Digital Camera is an intelligent, remote imaging surveillance device that performs such functions as motion detection and capturing and compressing images.

## Digital Video Recording (DVR)

Digital Video Recording (DVR) equipment and software from a range of manufacturers can be integrated with Command Centre, and allows digital video to be stored to a hard disk.

## Division

Division, (or system division), allows a site to be divided into smaller divisions and sub-divisions. Each sub-division can manage their own security needs without requiring access to other divisions' site configuration or access information.

## Door

Any point of entry or exit, such as an office door or car-park barrier arm which controls entry to an access zone.

## Door Not Locked

This is an alarm condition and indicates that the door should have locked but Command Centre has not detected the lock mechanism activation, indicating that the lock may be faulty or being interfered with.

## Door Open Too Long

The door has been opened correctly, but has been left open longer than is allowed.

## Door Reader

Any device, such as a swipe card or proximity reader which requires some form of identification from a cardholder.

## Door Status

Indicates the current status on the door, (e.g. door closed and locked, door closed and unlocked, door open and unlocked, etc.).

## Double card Override

Double card overrides are enabled in the reader properties. A double card override enables a cardholder to either:

* Override the access mode of an Access Zone (alternating between access mode 2 and scheduled) by badging their card twice at a card reader within a specified time frame, OR
* Override the Alarm Zone state to armed by badging their card twice at a card reader within a specified time frame.

**Note:** The double card override feature is not supported whilst an Access Zone is in Dual Authorisation mode.

## DTMF (Dual Tone Multi-Frequency)

DTMF (Dual Tone Multi-Frequency) is a standard signalling method for dialling and data transmission using a combination of two sine waves at different frequencies. It is commonly referred to as Touch-Tone® signalling.

## Dual Authorisation

An access mode which requires a valid access by two authorised cardholders to enter an access zone within a specified time period.

Note that this functionality is not supported for HLI or LLI elevator systems.

## Duress Alarm

An alarm generated by a Cardholder entering a special code at a PIN reader to indicate that they are being threatened or forced to provide access under duress.

## Duress Code

A special code entered at a PIN reader or terminal by a Cardholder to indicate that they are being threatened or forced to provide access under duress. Entering such a code generates a duress alarm. To raise a duress logon alarm:

1. Enter your valid user code with the last digit incremented by one.

   **For example:**

   User code 1256 = Duress logon is 125 **7**

   User code 1259 = Duress logon is 125 **0**
2. Press the **Enter** key.

## DVR (Digital Video Recording)

Digital Video Recording (DVR) equipment and software from a range of manufacturers can be integrated with Command Centre, and allows digital video to be stored to a hard disk.

## Elevator Car HLI

Used to refer to an elevator car that is associated with a high level elevator interface (Elevator HLI). Access to floors from the elevator car is controlled by Command Centre using the high level communications link.

## Elevator HLI

The Elevator HLI represents a high level communications link from Command Centre to the elevator system. Access to floors from elevator cars is controlled by Command Centre via the high level communications link.

## Entry Delay

A time delay, during which an alarm will not be reported, to allow a person entering an area time to reach a Key Switch, Card Reader or terminal that they can use to Unset the Alarm Zone without setting off any alarms.

## Entry Delay expired

When an entry delay has started but the zone was not disarmed within the Entry Delay time-out, alarms will not be generated from devices contained in the "Device(s) to use as Entry Points" and "Device(s) to ignore when entering" but Confirmed Alarms can still occur. See [Confirmed Alarms](#confirmed-alarms).

## Entry Path

A set of points contained within a zone, and which have an entry delay that does not apply to the rest of the zone.

## Entry Point

An Input that triggers an entry delay by opening. It does not have to be in the same zone as the zone that has the entry delay.

## Entry Reader

A door reader which controls entry into an access zone.

## Entry Zone

The access zone into which an entry reader allows access.

## Escort

An access mode which requires a cardholder who is part of an escort authorised group, to make a valid access after a visitor cardholder has also made a valid access. Also a cardholder belonging to an escort authorised group.

Note that this functionality is not supported for HLI or LLI elevator systems.

## Event

Some activity taking place on your site which creates an entry in the Event Viewer window, (e.g. a cardholder swiping their card to enter a door would be a cardholder event).

## Exit Delay

A time delay after setting a Zone, during which an alarm will not be reported, to allow a person who has just Set the Zone time to leave the area without setting off any alarms.

## Exit Point

An Input that terminates an exit delay by closing. It does not have to be in the same zone as the zone that has the exit delay.

## Exit Reader

A door reader which controls exit from an access zone.

## Exit Zone

The access zone into which an exit reader allows access.

## Facility Code

A Facility Code is an identification number stored on the access token. Each site or facility normally has their own unique facility code. Therefore, if cards are allocated identical card numbers, because the sites facility codes are different, access will not be allowed on both sites.

## Find Tool

The Find Tool enables users to search for and locate items within Command Centre. There are four tabs to help users define their search criteria.

## Flood Alarms

See 'Alarm Flooding'.

## Floor Select Timeout

Time from when specific floor select buttons are enabled in an elevator car, following a cardholder being granted access, to when the floor select buttons are returned to the default access state.

## Force Status Request

A pop-up menu option available for some items. Used to check the status of an item if it looks incorrect, (e.g. a guard can see that a door is open but the item does not show this). The status of an item will be up-to-date after selecting this option.

## Forced Door

Forced door alarms are optionally enabled or disabled, and are generated if a door is detected as being open while the system thinks it is still locked.

## Free Access

A state during which all doors into an access zone or elevator level are unlocked. A door into a free access zone is only unlocked however if the zone on the other side of the door is also in free access mode.

## Free Handle

Doors that are controlled by a pushbutton for entry can also have an additional 'Free Handle' option. This option can be used for doors where the lock does not need to be unlocked for exit. When this option is enabled, and a valid exit request is made, the doors lock relay will not activate (doors outside handle will remain locked).

## Global item

Global items can be viewed at, and edited from, any workstation connected to any server in a multi-server system by an operator with suitable privileges. Cardholders are the only Command Centre items that are global items.

## Grace Period

The system will generate an event when the zone count reaches a threshold value or zero. The grace period is the time that the system must allow from determining that the count has reached a threshold before generating the event. This is to allow time for the completion of relevant cardholder activity that may prevent the need for the event to be generated.

## Grid view

Any view in Command Centre where information is presented as columns of data in list form. Users can adjust the columns in various ways and resort the information.

## Hardware

An item which physically exists, such as a door reader or a Controller.

## HBUS Alarms Only Terminal

The HBUS Alarms Only Terminal can be used by suitably authorised Command Centre operators to perform many of the alarm management operations normally available only from Command Centre workstations. An HBUS Alarms Only Terminal is connected to the Controller 6000. An HBUS Alarms Only Terminal uses the HBUS communications protocol to communicate with the Controller 6000.

## HBUS I/O Interface

The HBUS I/O Interface is an input monitoring and output control unit. It is available in four hardware variants: 8-In Board, 8-In 2-Out Door Module, 8-In 4-Out Board, and 16-In 16-Out Board. The 8-In 2-Out Door Module allows the connection of HBUS Readers and HBUS Terminals. Making no high level decisions, the HBUS I/O Interface monitors the state of balanced inputs and switches the output relays as instructed by the Controller 6000.

## HBUS Terminal

The HBUS Terminal can be used by suitably authorised Command Centre operators to perform many of the alarm management operations normally available only from Command Centre workstations. The HBUS Terminal can also be used as an access control terminal and smart card proximity reader. An HBUS Terminal is connected to the Controller 6000. An HBUS Terminal uses the HBUS communications protocol to communicate with the Controller 6000.

## IAS

Intruder Alarm System

## Icon

A small picture representing an object or action. May often be inter-acted with in some way, (e.g. shows the status).

## Inactivity Timeout

The configurable period of card inactivity that will cause that card to expire.

## Inhibit

After an Entry Delay has expired because the zone did not get unset (disarmed), confirmed alarms can be inhibited. The effect of this is that Contact ID code 139 will not be notified to the Alarm Receiving Centre (ARC) and events from devices contained in the "Device(s) to use as Entry Points" and "Device(s) to ignore when entering" will not cause an alarm.

## Input

A four-state sensor (switch), in a device. The states are Open, Closed, Open Circuit and Short Circuit Tamper. This allows greater security if correctly wired because attempting to cut or short the wires will generate an open or short circuit tamper alarm instead of an Open or Closed event.

## Input Isolated

See 'Isolating Inputs'.

## Input Shunted

See 'Shunting Inputs'.

## Insertion Tag

A tag that represents a small piece of information, (e.g. phone number) that can be inserted into an Alarm Instruction. (See 'Alarm Instruction'.).

## Isolating Inputs

The Input's state is to be ignored while in an isolated state and will no longer trigger alarms. Isolation only persists until the next time the Alarm Zone is unset.

**Note:**

Input Shunted and Input Isolated are both in the same Event Group, but shunting takes precedence. This means that is an Input has been shunted it will not also get isolated. If an Input has been isolated, it may however be shunted. The isolation ends when the Alarm Zone changes state, but the shunt will continue until the shunt is removed.

## List Window

List Windows are used for navigation and management control. They are the starting point for creating new objects, editing existing objects and deleting old objects, (e.g. the Cardholder List Window provides a list of all the Cardholders).

## Locale

An identifier Windows uses to specify a language. It can be set either at a Window Logon level or at the Thread level. The locale has a language identifier, (e.g English) and a dialect identifier, (e.g. New Zealand).

## Macro

Macros allow an operator to schedule either a set of pre-programmed overrides or a bulk change. Macros provide the ability to group and schedule them for a specific time and duration, either on a one-off basis or for events that repeat on a daily basis.

## Mag-Stripe Card

A plastic card with access control information encoded on a magnetic stripe on the side.

## Maintenance Warning and Failure

Maintenance events all report unusual conditions from field devices. 'Failures' are more serious than 'Warnings'.

## Master Zone

Individual Access Zones can be associated with a Master Zone so they become members of an Access Zone Group. Grouping Access Zones allows anti-passback to be applied to the group rather than individual zones.

## Multi-breaks

The multi-breaks option determines how repeated alarm messages will be sent via Contact ID, to a remote alarm monitoring company. A site can choose to send multiple transmissions of the same alarm occurrence, (i.e. alarm floods), or to send just one and then wait for an Alarm Zone Set/Unset before sending another.

## Multiple Client Code Reporting (Contact ID)

Multiple Client Code Reporting is when a different account code is assigned to each Alarm Zone for the purposes of sending Contact ID.

**Example:**

Account Code = 1234, so an arm area 1 will be 123418340201001 and the disarm 123418140201001.

Account Code = 1235, so an arm area 1 will be 123518340201001 and the disarm 123518140201001, and so on.

(Check with your monitoring station that they support Multiple Client Code Reporting before sending any data.)

## No-Alone Zone

A count zone where, for security or safety reasons, cardholders are not allowed to be in the zone alone. It may or may not be acceptable to be completely empty. When the zone is empty the only allowed access is two cardholders entering the zone together. The last two cardholders must leave together. Whilst the zone count is two or more, cardholders may enter one at a time. Whilst the zone count is more than two, cardholders may leave one at a time.

## Open

The contacts on an Input are open. The Input is 'active'.

## Operator

Any person authorised to use Command Centre.

## Operator Group

A group of Cardholders who are authorised to use Command Centre. Each Operator Group defines the privileges members have as Command Centre operators, (e.g. View only access, editing ability, etc.).

## Operator Privileges

Operator privileges restrict the functionality available to operators, (e.g. a receptionist may have access to fewer features than a person responsible for the system configuration and maintenance).

## Output

A two-state relay in a device, which controls a device such as a magnetic lock, alarm bells or a warning light, etc. Also used to refer to the device controlled by such a relay.

## Override

Overrides enable an operator to temporarily change the status of an item attached to their Command Centre system. They enable operators to respond to common, random events, (e.g. temporarily unlock a door to give access to a cardholder who has forgotten their card).

## PACE

Gallagher Card-Reader Card or Key.

## Passive InfraRed (PIR) Detector

A device that senses body heat to detect motion, and generates an alarm condition.

## PDF (Personal Data Field)

Personal Data is information that is stored for an individual cardholder, (e.g. date of birth, company, photographs, etc.). Personal Data Fields are created as separate entities and are attached to Access Groups. They can be either textual fields or image fields. Cardholders inherit the Personal Data Fields from the Access Group(s) they belong to.

## Photo ID

Photo ID is a licensable feature used within Command Centre to design and print card layouts.

## PIN (Personal Identification Number)

Each cardholder has their own personal identification number, known only by them. Besides badging your card, the method of access to an access zone during certain times may include entering your PIN.

## PIN Entry Timeout

Maximum time allowed for a cardholder to enter their PIN. Measured from card badge.

## PIN Pad

A numeric key pad used to enter PINs.

## PINs mode

A door state where access is granted by entering a single, system defined PIN number.

## PIR (Passive InfraRed) Detector

A device that senses body heat to detect motion, and generates an alarm condition.

## Polling

Sending messages between devices to ascertain their status.

## Power Failure

Mains power to the Controller is lost.

## Prox Reader

The Prox Reader is a card only reader, providing fast, secure access by simply passing a card transponder across the face of the device. It is designed for use in both internal and external environments.

## Push Configuration

A pop-up menu option available for some items. This forces an update of the configuration of the site item to the Controller. This is most likely to be used after an upgrade of Command Centre.

## Reader I/O Interface

The Reader I/O Interface provides a cost-effective means for using Cardax IV format readers with the Command Centre Access Control System. The Interface has connections for 16 Cardax IV format readers, 24 balanced inputs and 8 control relays; enough to control 8 fully controlled and monitored doors. The Interface makes no decisions itself, all data from the readers and input status are sent to the Controller 5000.

## Reader Module

The Reader Module is used with the Gallagher Controller 6000 to allow connection of readers, inputs and outputs. While the Controller 6000 is the processing board, the Reader Module handles I/O and reader communications.

## Relay Interface

The Relay Interface is an output control panel containing 20 relay outputs. It is used where a large number of output relays are required in a control environment and as the output interface for low level elevator access control. Making no high level decisions, the Relay Interface switches the output relays as instructed by the Controller 5000.

## Remote item

Remote items are only editable from workstations connected to the server they were created on in a multi-server system. Some remote items can be viewed from servers other than their home server, and behave as **read-only** representations of the original item when viewed from a remote server.

## Restore

The working system can be restored from a backup file record.

## Schedule

A schedule is a 'list of times and states that controls an item'.

## Secure Access

A state during which only authorised cardholders are allowed access to an access zone or elevator level, and may also require an optional PIN. The doors to a secure access zone will be in a normally locked state and elevator buttons normally disabled.

## Server

The Command Centre Server runs on a personal computer (PC) under any of the following Microsoft operating systems:

* Windows 10 Pro/Enterprise,
* Windows 8.1 Pro/Enterprise,
* Windows Server 2019,
* Windows Server 2016,
* Windows Server 2012 / 2012 R2,
* Windows Server 2008 R2

The Command Centre Server is a background application which drives Command Centre workstations and enables the programming of the Controllers.

## Shunting Inputs

The Input's state is to be ignored while in a shunted state and will no longer trigger alarms. When an Input is shunted, it is taken out of the system until such time as it is put back in. Shunting an Input is the same as doing a 'Stop Communications' override on an Input.

**Note:**

Input Shunted and Input Isolated are both in the same Event Group, but shunting takes precedence. This means that if an Input has been shunted it will not also get isolated. If an Input has been isolated, it may however be shunted. The isolation ends when the Alarm Zone changes state, but the shunt will continue until the shunt is removed.

## Single Client Code Reporting (Contact ID)

Single Client Code Reporting is when a single account code is used to send Contact ID, (i.e. each Alarm Zone will report under a single client code. The Alarm Zones are defined by the GG value).

**Example:**

Account Code = 1234, so an arm area 1 will be 123418340201001 and the disarm 123418140201001.

Account Code = 1234, so an arm area 2 will be 123418340202001 and the disarm 123418140202001, and so on.

(Check with your monitoring station that they support single client code reporting before sending any data.)

## Site

The building(s) and areas controlled by the Command Centre system.

## Site Plan

A window in Command Centre which displays the layout (a map of the site), and enables users to see the relationship of devices/site items to one another. Users can also monitor the status of site items and process alarms from this window.

## Status

This refers to the current state of an item attached to the Command Centre system. The status displayed for each item will depend on the type of device, (e.g. an Input would normally be opened or closed, whereas a Door would be secure, free, etc.).

## Strike Controller

The Strike Controller contains six balanced inputs and two relay outputs. It has two primary purposes as follows: 1) To provide inputs and outputs for the control of two doors. 2) To provide electrical isolation for the power and communications to card readers mounted externally protecting the rest of the system from being compromised by an 'electrical' attack on the connections to these readers.

## Swipe Card

A plastic access card which is swiped through a slot in a door reader to allow access.

## System Division

Division, (or system division), allows a site to be divided into smaller divisions and sub-divisions. Each sub-division can manage their own security needs without requiring access to other divisions' site configuration or access information.

## Tailgating

Following someone through a door without presenting one's own credential.

## Tamper

Someone has either opened a device or a cabinet containing devices, or tried to remove them from their mountings, or the wiring to inputs has gone open or short circuit.

## Tamper Return to Normal

The tamper condition has been corrected, (e.g. the cabinet door has been closed).

## Tree view

A tree view displays information with branches representing the different levels in the hierarchy.

## Turnstile

A door which only allows one person through between opening and closing. Tailgating is difficult with turnstiles.

## Valid Access

Any attempt at entry or exit, such as presenting a card or entering a PIN, which would normally allow access.

## Visitor Cardholder

A cardholder that has access to certain zones on a site, but only if an escort is present to validate their access.

## Workstation

The Command Centre workstation is the user interface to the Command Centre system. Through workstations, operators can program and modify cardholder access and site set up information, monitor what is happening on your site, process alarms and generate reports.

## Wrong PIN

The Cardholder has entered an incorrect PIN number and must enter the correct number before gaining entry. See also PIN.

## Zone Count Maximum

The number of Cardholders in the zone has reached the maximum threshold.

## Zone Count Mid-Range

The number of Cardholders in the zone has reached the mid-range threshold.

## Zone Count Minimum

The number of Cardholders in the zone has fallen to the minimum threshold.

## Zone Counting

Zone counting is simply keeping count of the number of cardholders inside an Access Zone or an Access Zone Group.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.security.gallagher.com/knowledge-hub/configuration-client/glossary-of-terms.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
