> For the complete documentation index, see [llms.txt](https://help.security.gallagher.com/knowledge-hub/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.security.gallagher.com/knowledge-hub/command-centre-client/using-command-centre/licensable-features/intercom-viewer-feature/answering-a-call.md).

# Answering a call

We strongly recommend that you disable privacy mode in the Intercom software in order to answer calls via any of the available methods. Note that privacy mode MUST be disabled if you want to answer calls using one of the options in Command Centre or the Configuration Client.

An operator can answer a call from:

* a Commend Console,
* a Commend Intercom item configured in Command Centre or the Configuration Client (located on a Site Plan tile or Status tile), or
* an Intercom Viewer in Command Centre.

**Notes:**

* You can configure the Intercom Viewer not to pop to the front, if required. See [Creating the Intercom Viewer](https://help.security.gallagher.com/knowledge-hub/command-centre-client/configuring-command-centre/configuring-licensable-features/intercom-viewer-configuration/creating-the-intercom-viewer.md) for detail.
* If a call arrives while the operator is handling another call, the new call is added to the list.

1. Open the Intercom Viewer.
2. Click on the row of the call event you want to respond to, so it becomes highlighted.

   Either the Panel configured specifically for the intercom for which the call event was generated, or the default Panel will display.

   To connect to the call event click the **Answer** button.

   The call event is cleared from all other workstations. The time remaining is cleared, and the console will connect to the intercom.

   **Notes:**

   * If you fail to connect to the call event within the time shown in the "Seconds Remaining" column, the cardholder will be denied access and the call event is cleared from the list.
   * If an intercom device is configured with its own call timeout, the call will end as per that timeout even if the “Seconds Remaining” timer has not run out.
   * For SIP Intercoms, If you call a busy intercom, your call will not be automatically connected once the intercom becomes free. You can manually hang up the call and try again.

   You can now:

   * talk to the cardholder, if required via the Intercom console,
   * place the call on hold,
   * open the door associated with the intercom,
   * forward the call, or
   * end the call.

   Take the appropriate action as required:

#### Placing a call on hold

Once you have answered a call, you have the option to place the call on hold at any time.

1. Click the **Hold** button.

   The status of the call changes to "On hold".

Opening the door associated with an intercom

1. Click the **Open Door** button.

   The door that is associated with the intercom opens.

   **Notes:**

   * If no door is associated the **Open Door** button is disabled.
   * You need the "Override - Open Door" operator privilege to perform this function.

#### Forwarding a call

Only a current (answered) call can be forwarded to another Intercom.

1. From the **Intercom Viewer**, select the call you wish to forward to another Intercom.
2. Click the **Forward** button.

   The Forward Call pop-up displays with a list of all the Intercoms in the operator's division.

   ![](https://2455150842-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fi6UYAoyykM6nimMN9yss%2Fuploads%2Fgit-blob-df0141ffc348b28560a94182807ac9986498b293%2Fintercomviewer_forwardcallpopup.png?alt=media)

   **Note:** This list excludes the Intercom that initiated the call, and the workstation Intercom you are forwarding from.
3. Highlight the appropriate Intercom, and click the **Forward** button.

   The target intercom is called.
4. Once the target intercom answers the call, the **Complete** button is enabled.

   Click the **Complete** button in the Intercom Viewer to complete the forwarding.

   The next call is selected automatically, and the appropriate Panel displayed.

#### Ending a call

1. Once you have answered a call, click the **Hang Up** button to end it at any time.

   The call event is cleared from the list and removed from all other workstation PCs. The next call in the queue is selected automatically, and the appropriate Panel displayed.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.security.gallagher.com/knowledge-hub/command-centre-client/using-command-centre/licensable-features/intercom-viewer-feature/answering-a-call.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
