> For the complete documentation index, see [llms.txt](https://help.security.gallagher.com/knowledge-hub/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.security.gallagher.com/knowledge-hub/command-centre-client/using-command-centre/licensable-features/austco-intercom-feature.md).

# Austco Intercom feature

When you first log on to Command Centre the Viewer that displays depends on your privileges. Click the **Austco Intercom Viewer** button on the Command Centre toolbar, if the Austco Intercom Viewer is not already open.

![](https://2455150842-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fi6UYAoyykM6nimMN9yss%2Fuploads%2Fgit-blob-65f1b46623a97c96778661327b7de183b8d11103%2Faustcointercomviewer.png?alt=media)

The Navigation Panel for an Austco Intercom Viewer is a list of call events for the intercoms configured for the Viewer, where the event has not been processed. Events that time out disappear from the list. Default sort order is seconds remaining, with the one due to expire soonest at the top. The columns displayed in the Navigation Panel can be resized but not reordered. Incoming calls display in red text, and when a call is connected the incoming call text changes from red to green.

Selecting an event displays either the Viewer Panel configured specifically for the intercom for which the event was generated, or the default Panel. Tiles on the Viewer can be maximised (made larger) so all content is visible without scrolling.

**Notes:**

* If Command Centre loses its network connection to the Austco server, then once the network comes back and the SAD is online, it can take several minutes before the connection to Austco is restored. This delay can be shortened by restarting the Austco server.
* Austco calls do not appear in the calling list when an operator logs on.

### Austco Intercom icons

The Austco Intercom icon (which can appear on the Status tile and Site Plan tile) has three states, as follows:

<table><thead><tr><th width="174">When an intercom is...</th><th>then the icon is in the...</th></tr></thead><tbody><tr><td>idle,</td><td><img src="https://2455150842-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fi6UYAoyykM6nimMN9yss%2Fuploads%2Fgit-blob-935b8a50aad6a60cd938cb361d34bfe8b6c85b68%2Faustco_normaloperation.png?alt=media" alt=""> Normal Operation state, and on a Site Plan the line/area colour is Black.</td></tr><tr><td>ringing,</td><td><img src="https://2455150842-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fi6UYAoyykM6nimMN9yss%2Fuploads%2Fgit-blob-962338c6fef39274f6c34d6abd77970116140f4b%2Faustco_callringing.png?alt=media" alt=""> Call ringing state, and on a Site Plan the line/area colour is Red.</td></tr><tr><td>connected on a call,</td><td><img src="https://2455150842-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fi6UYAoyykM6nimMN9yss%2Fuploads%2Fgit-blob-fab13f6000f484826f1cfd825844b83fbecfb10f%2Faustco_callconnected.png?alt=media" alt=""> Call connected state, and on a Site Plan the line/area colour is Green.</td></tr></tbody></table>

### Operator Privileges

To view and perform the necessary functions within this viewer, you will require the appropriate operator privileges, as follows:

<table><thead><tr><th width="174">Operator Privilege</th><th>Required to...</th></tr></thead><tbody><tr><td>"Use Intercom"</td><td>connect to an intercom.</td></tr><tr><td>"Override - Open Door"</td><td>open an intercom's associated door.</td></tr><tr><td>"View Events"</td><td>view intercom call events.</td></tr><tr><td>"View Site"</td><td>view Austco Intercom Systems or Austco Intercom items.</td></tr><tr><td>"Edit Site"</td><td>add, remove or modify Austco Intercom Systems or Austco Intercom items.</td></tr></tbody></table>

<details>

<summary>Changing the text size</summary>

The size of the text can be adjusted by clicking on ![](https://2455150842-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fi6UYAoyykM6nimMN9yss%2Fuploads%2Fgit-blob-23f64398526e9351c6ffac93a84270dd8fb2b896%2Ftextsize.png?alt=media) below the list of call events, and then dragging the indicator that displays as necessary. Change in text size is remembered as an operator preference.

</details>

<details>

<summary>Placing a call</summary>

An operator can place a call from:

* an Austco Console connected to a Command Centre workstation,
* an Austco Intercom item configured in Command Centre (located on a Site Plan tile or Status tile), or
* an Austco Intercom Viewer.

**Notes:**

* If an operator attempts to call an intercom which has a call waiting in the list, then that existing call in the list simply enters the "Connected" state.
* The **Call** button remains enabled when the Austco Intercom System is offline, the workstation Austco Configuration is incorrect, or the Austco Console is disconnected from the workstation.

1. Open the Austco Intercom Viewer.
2. Click the **Call** button.

   The Place Call pop-up displays with a list of possible call destinations.

   ![](https://2455150842-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fi6UYAoyykM6nimMN9yss%2Fuploads%2Fgit-blob-5ad7b142132c6ac4a1738346a6cfc420cb6c36a4%2Faustcoplacecall.png?alt=media)

   **Note:** This list excludes the workstation intercom you are calling from.
3. Highlight the intercom you want to call and click the **OK** button.

   The workstation calls the intercom and the call appears in the list.

</details>

<details>

<summary>Answering a call</summary>

An operator can answer a call from:

* an Austco Console connected to a Command Centre workstation,
* an Austco Intercom item configured in Command Centre (located on a Site Plan tile or Status tile), or
* an Austco Intercom Viewer.

**Notes:**

* You can configure the Austco Intercom Viewer not to pop to the front, if required. See [Creating the Austco Intercom Viewer](https://help.security.gallagher.com/knowledge-hub/command-centre-client/configuring-command-centre/configuring-licensable-features/austco-intercom-feature-configuration/creating-the-austco-intercom-viewer.md) for detail.
* When a new call appears in the "Ringing" state in the list, the workstation plays the "IntercomCall" sound as configured in the workstation "Sound" control panel in Windows. By default, the notify.wav sound file from the Windows Media folder is configured to play. You can choose to select a different sound file, if required.
* If a call arrives while the operator is handling another call, the new call is added to the list.

1. Open the Austco Intercom Viewer.
2. Click on the row of the call event you want to respond to, so it becomes highlighted.

   Either the Panel configured specifically for the intercom for which the call event was generated, or the default Panel will display.
3. To connect to the call event click the **Connect** button.

   The call event is cleared from all other workstations. The time remaining is cleared, and the console will connect to the intercom.

   **Note:** If you fail to connect to the call event within the time remaining, (i.e. the time indicated in the "Seconds Remaining" column), the cardholder will be denied access and the call event is cleared from the list.

   You can now:

   * talk to the cardholder, if required via the Austco console,
   * open the door associated with the intercom, or
   * end the call.

   Take the appropriate action as required:

#### Opening the door associated with an intercom

1. Click the **Open Door** button.

   The door that is associated with the intercom opens.

   **Notes:**

   * If no door is associated the **Open Door** button is disabled.
   * You need the "Override - Open Door" operator privilege to perform this function.

#### Ending a call

Once you have answered a call, you have the option to end the call at any time.

1. Click the **Cancel** button.

   The call event is cleared from the list and removed from all other workstation PCs. The next call event is selected automatically, and the appropriate Panel displayed.

   **Note:** If an operator attempts to cancel a call from another workstation, the error message *"Access is denied"* displays in the Austco Intercom Viewer. A workstation can only cancel its own calls.

</details>


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.security.gallagher.com/knowledge-hub/command-centre-client/using-command-centre/licensable-features/austco-intercom-feature.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
