> For the complete documentation index, see [llms.txt](https://help.security.gallagher.com/knowledge-hub/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.security.gallagher.com/knowledge-hub/command-centre-client/configuring-command-centre/viewer-configuration-overall-process/configuring-the-viewer-navigation-panel/spot-monitor-viewer.md).

# Configuring the Spot Monitor Viewer Navigation Panel

The Navigation Panel for a Spot Monitor Viewer can display Event messages and/or Warning messages, or it can be configured to be blank. Configure as follows:

1. Move the mouse over the Spot Monitor Viewer Navigation Panel, and click on the **Click to Configure** button that appears.

   The Spot Monitor Viewer Configuration pop-up displays.

   ![](https://2455150842-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fi6UYAoyykM6nimMN9yss%2Fuploads%2Fgit-blob-497efeb36ba5d388de4075b73d4b246cc2efabe2%2Fspotmonitorviewer_configuration.png?alt=media)
2. Check the **Display Event Message** and/or **Display Warning Message** checkboxes if you want these to display in the Viewer Navigation Panel.

   **Note:** If neither of these are selected the Viewer Navigation Panel will appear blank in operational mode. If you want it to be blank, you can resize the Navigation Panel to a minimal height to allow more screen area for tiles.

<details>

<summary>Resizing the Navigation Panel to a minimal height</summary>

1. Move the mouse pointer to the bottom edge of the Navigation Panel so it becomes a "double-ended" arrow.
2. Hold down the mouse button and move it in the required direction.
3. When the panel is the required size, release the mouse button.

   ![](https://2455150842-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fi6UYAoyykM6nimMN9yss%2Fuploads%2Fgit-blob-004650564555099847a6c911dd7930bd798bee37%2Fspotmonitor_configurenavpanel.png?alt=media)

</details>

3. Configure the panel(s) you want to display.

   **Note:** The ![](https://2455150842-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fi6UYAoyykM6nimMN9yss%2Fuploads%2Fgit-blob-1917d0a2636ac19bbf408180779ffc8b8ea0cc89%2Fquicktipsbutton.png?alt=media) button beside the **Panel Rules** section can be clicked to provide [quick tips for configuring Spot Monitor panels](https://help.security.gallagher.com/knowledge-hub/command-centre-client/configuring-command-centre/viewer-configuration-overall-process/configuring-the-viewer-navigation-panel/spot-monitor-viewer/quick-tips-for-configuring-panels.md).

<details>

<summary>Creating a Rule</summary>

1. Click the **Create Rule** button.

   The New Rule Definition pop-up opens.

   ![](https://2455150842-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fi6UYAoyykM6nimMN9yss%2Fuploads%2Fgit-blob-3f88b2672fb99c9e64be71aa3d96d3db1f7bbc7b%2Fspotmonitor_newruledefinition_popup.png?alt=media)
2. Select the Alarm Priority from the drop-down list.
3. Click the appropriate radio button to indicate whether you want to activate the Spot Monitor Viewer from a **Single Source** or **Multiple Sources**.

   **Note:** This provides the option for different panels to display depending on the number of sources in alarm.
4. Click the appropriate radio button for the Event Source(s) you want to use.

   Which option did you select?

   <table><thead><tr><th width="144">If...</th><th>then...</th></tr></thead><tbody><tr><td><strong>All Sources</strong>,</td><td>go to Step 5.</td></tr><tr><td><strong>Specific Sources</strong><br>OR<br><strong>All Sources By Division and Item Type</strong>,</td><td><p>Select the Event Source(s), as follows:</p><ol><li>Click the <strong>Add Event Sources</strong> button.<br>A browse tool displays.<br><img src="https://2455150842-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fi6UYAoyykM6nimMN9yss%2Fuploads%2Fgit-blob-e359689e1cc1086224dfc336b98b45dd7c75945e%2Fspotmonitor_selecteventsources_popup.png?alt=media" alt=""><br></li><li>Search for the item(s) you want to use as an Event Source by entering search criteria in the <strong>Search</strong> field and/or refining the filters.<br>The grid becomes populated with items that match the search criteria.</li><li>Click in the checkbox next to the item name you want to include, or click the <strong>Select All</strong> button if you want to include all items.</li><li>Click the <strong>Add Selection</strong> button.<br>The pop-up closes and the item(s) you selected appear in the Event Sources grid.<br><br><strong>Note:</strong> An Event Source can be removed using the <strong>Remove</strong> button.</li></ol></td></tr></tbody></table>
5. Assign the Panel for the Alarm Priority by clicking the appropriate radio button:

   <table><thead><tr><th width="193">If you click...</th><th>then...</th></tr></thead><tbody><tr><td>Choosing an existing panel</td><td>select the required Panel from the drop-down list.</td></tr><tr><td>Copying a Panel</td><td>select the Panel you want to copy from the drop-down list, and enter a name for the Panel to copy to.</td></tr><tr><td>Creating a new Panel</td><td>enter a name for the new Panel.</td></tr></tbody></table>
6. Click the **OK** button.

   The **New Rule Definition** pop-up closes, and the new entry appears in the Panel Rules grid.

   **Note:** The **up** and **down** arrows to the side of the Panel Rules grid can be used to change the order if required, (i.e. select the rule you want to move and click either the up or down arrow to move it).

</details>

<details>

<summary>Updating a Rule</summary>

1. Click on the Panel Rule you want to update so it becomes highlighted.
2. Click the **Update Rule** button.

   The Update Rule Definition pop-up opens.

   ![](https://2455150842-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fi6UYAoyykM6nimMN9yss%2Fuploads%2Fgit-blob-d563454c06687474564857e81c7c469e98f48cb7%2Fspotmonitor_updateruledefinition.png?alt=media)
3. Change any of the 'Rule Properties' if necessary.
4. Assign a different Panel for the Alarm Priority by clicking the appropriate radio button:

   <table><thead><tr><th width="220">If you click...</th><th>then...</th></tr></thead><tbody><tr><td>Choosing an existing panel</td><td>select the required Panel from the drop-down list.</td></tr><tr><td>Copying a Panel</td><td>select the Panel you want to copy from the drop-down list, and enter a name for the Panel to copy to.</td></tr><tr><td>Creating a new Panel</td><td>enter a name for the new Panel.</td></tr></tbody></table>
5. Click the **OK** button.

   The **Update Rule Definition** pop-up closes, and the Panel to Display is updated in the grid.

</details>

<details>

<summary>Deleting a Rule</summary>

1. Click on the Panel Rule you want to delete so it becomes highlighted.
2. Click the **Delete Rule** button.

   The Delete Rule pop-up displays.

   ![](https://2455150842-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fi6UYAoyykM6nimMN9yss%2Fuploads%2Fgit-blob-db4d2a012d08994a5ea245e9c3e764c12f647dd7%2Fspotmonitor_deleterulepopup.png?alt=media)
3. If there are no other alarms assigned to this panel a **Delete the panel** checkbox will appear also on this screen.

   Tick this checkbox if you want to delete the panel.
4. Click the **OK** button.

   The **Delete Rule** pop-up closes, and the entry disappears from the grid.

</details>

4. Click the **OK** button.

   The Spot Monitor Viewer Configuration pop-up closes.
5. Assign the Spot Monitor Viewer to the operators who require it, as follows:

   <table><thead><tr><th width="204">If you are...</th><th>then...</th></tr></thead><tbody><tr><td>using a purely automated Spot Monitor,</td><td><ol><li>Set up the Operator Profile for the dedicated Workstation.</li><li>Set up the Operator Group to be associated with the Spot Monitor.</li></ol></td></tr><tr><td>allowing other Operators to take control of the Spot Monitor,</td><td><ol><li>Add these Operators to the Operator Group that will be associated with the Spot Monitor.</li><li>Set up an Alarm Viewer for the Spot Monitor Operator Group.</li><li>Configure the Alarm Viewer Navigation Panel to add Spot Monitor Viewer controls to the Navigation Panel.</li></ol></td></tr></tbody></table>
6. If you intend viewing camera footage on the Spot Monitor Viewer via Camera tiles, you need to set up cameras in Configuration Client first. See [Setting up DVR Cameras](https://help.security.gallagher.com/knowledge-hub/command-centre-client/configuring-command-centre/viewer-configuration-overall-process/configuring-the-viewer-navigation-panel/spot-monitor-viewer/setting-up-dvr-cameras.md) for further detail.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.security.gallagher.com/knowledge-hub/command-centre-client/configuring-command-centre/viewer-configuration-overall-process/configuring-the-viewer-navigation-panel/spot-monitor-viewer.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
