> For the complete documentation index, see [llms.txt](https://help.security.gallagher.com/knowledge-hub/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.security.gallagher.com/knowledge-hub/command-centre-client/configuring-command-centre/viewer-configuration-overall-process/configuring-the-viewer-navigation-panel/alarm-viewer.md).

# Configuring the Alarm Viewer Navigation Panel

The Navigation Panel for an Alarm Viewer is a list of Alarms. Configure as follows:

1. Move the mouse over the Alarm Viewer Navigation Panel, and click on the **Click to Configure** button that appears.

   The Alarm Viewer Configuration pop-up displays.

   ![](https://2455150842-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fi6UYAoyykM6nimMN9yss%2Fuploads%2Fgit-blob-2d91c28cac76d9203d1d5737cf7e4b3f7db68e1a%2Falarmlistconfiguration.png?alt=media)
2. Select the type of alarms you want to include from the **Escalation** drop-down list.

   The options are:

   * Both Escalated and Non-Escalated Alarms
   * Non-escalated Alarms Only
   * Escalated Alarms Only
3. Do you want to include all Divisions?

   <table><thead><tr><th width="60">If...</th><th>then...</th></tr></thead><tbody><tr><td>yes</td><td>click the <strong>All Divisions</strong> radio button.</td></tr><tr><td>no</td><td><p>you must select the Divisions you want to include. To do this:</p><ol><li>Click the <strong>Selected Divisions</strong> radio button, and then select the <strong>Select Divisions</strong> button.<br>A browse tool displays.<br><img src="https://2455150842-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fi6UYAoyykM6nimMN9yss%2Fuploads%2Fgit-blob-7b199073d021ca11902823b748c96d639d5d5f0f%2Fselectdivision_browsetool.png?alt=media" alt=""><br></li><li>Check the Division(s) you want to include in the Alarm Viewer.<br>The <strong>Deselect All</strong> and <strong>Add Selection</strong> buttons are enabled.</li><li>Click the <strong>Add Selection</strong> button.<br>The browse tool closes, and the selected Division(s) appear in the grid below the <strong>Select Divisions</strong> button.</li></ol></td></tr></tbody></table>
4. Do you want to include all Priorities?

   <table><thead><tr><th width="60">If...</th><th>then...</th></tr></thead><tbody><tr><td>yes</td><td>click the <strong>All Priorities</strong> radio button.</td></tr><tr><td>no</td><td>click the <strong>Selected Priorities</strong> radio button, and then individually check those Priorities to be included.</td></tr></tbody></table>
5. Check the **Allow Filtering by Alarm State** checkbox if you want users to be able to filter an alarm list in operational mode.

   If checked, the Filter options, (i.e. **All Alarms**, **Unacknowledged** and **Acknowledged** ) will be visible in operational mode, allowing users to select the filter they require for the Viewer.
6. Configure the columns you want to display.

   Column selection is indicated by a "tick" and is made by clicking in the checkbox next to the name.

   **Note:** The **Priority**, **Alarm State**, **Occurrence Time** and **Message** columns are selected by default, of which only the **Message** column can be de-selected.
7. Configure the panel(s) you want to display.

   **Notes:**

   * The ![](https://2455150842-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fi6UYAoyykM6nimMN9yss%2Fuploads%2Fgit-blob-1917d0a2636ac19bbf408180779ffc8b8ea0cc89%2Fquicktipsbutton.png?alt=media) button beside the **Panel Rules** section can be clicked to provide [quick tips for configuring panels](https://help.security.gallagher.com/knowledge-hub/command-centre-client/configuring-command-centre/viewer-configuration-overall-process/configuring-the-viewer-navigation-panel/alarm-viewer/quick-tips-for-configuring-panels.md).
   * If you have a long list of panels to work with, rather than scrolling through the list you can use the arrow button ![](https://2455150842-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fi6UYAoyykM6nimMN9yss%2Fuploads%2Fgit-blob-8d05e249c9f1da89cabcc1e491bc17f0290ad6e9%2Fexpandarrow.png?alt=media) at the right of the panel area to expand it so it takes up most of the Configuration pop-up.
   * If a new Viewer is being created or no specific rules have been defined for the Viewer, the only entry will be for the default rule. The panel configured for the default rule will be displayed whenever an Alarm is selected in the Viewer for which a specific rule has not been defined. The default rule entry cannot be removed but an alternative panel can be selected. The Default Alarm Panel is based on a template (Alarm Panel) which is shipped with the product. It is possible to change the content of the Default Alarm Panel, including which tiles are selected, the position, size and configuration of tiles. It is also possible for this panel to be renamed and/or assigned to a different rule.

<details>

<summary>Creating a Rule</summary>

1. Click the **Create Rule** button.

   The New Rule Definition pop-up opens.

   ![](https://2455150842-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fi6UYAoyykM6nimMN9yss%2Fuploads%2Fgit-blob-299f8e7490fa2e82e21d6e5b3bacbe17306b176b%2Fnewruledefinition_popup.png?alt=media)
2. Select the Event Source, as follows:

   1. Click the **\<not filtered>** button.

      A browse tool displays.

      ![](https://2455150842-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fi6UYAoyykM6nimMN9yss%2Fuploads%2Fgit-blob-36105f1ef86785e94063ff8fd9692bf6684ff68f%2Fselecteventsource_popup.png?alt=media)
   2. Search for the item you want to use as an Event Source by entering search criteria in the **Search** field and/or refining the filters.

      The grid becomes populated with items that match the search criteria.
   3. Click the radio button next to the item name you want to use.
   4. Click the **OK** button.

      The pop-up closes and the **\<not filtered>** button changes to the name of the item you selected.

   **Note:** The **Reset** button allows you to reset the Event Source selection to \<not filtered>.
3. Select the required **Event Group** from the drop-down list.

   The **Event Type** drop-down list is populated with the Event Types applicable for the selected Event Group.
4. Select the required **Event Type** from the drop-down list.
5. Assign the Panel for the Alarm by clicking the appropriate radio button:

   <table><thead><tr><th width="193">If you click...</th><th>then...</th></tr></thead><tbody><tr><td>Choosing an existing panel</td><td>select the required Panel from the drop-down list.</td></tr><tr><td>Copying a Panel</td><td>select the Panel you want to copy from the drop-down list, and enter a name for the Panel to copy to.</td></tr><tr><td>Creating a new Panel</td><td>enter a name for the new Panel.</td></tr></tbody></table>
6. Click the **OK** button.

   The **New Rule Definition** pop-up closes, and the new entry appears in the grid.

</details>

<details>

<summary>Updating a Rule</summary>

1. Click on the Panel Rule you want to update so it becomes highlighted.
2. Click the **Update Rule** button.

   The Update Rule Definition pop-up opens.

   ![](https://2455150842-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fi6UYAoyykM6nimMN9yss%2Fuploads%2Fgit-blob-191fd0e5d3b7dbfc4ae3d7b7ec0d766c5db498ee%2Fupdateruledefinition_popup.png?alt=media)
3. Assign a different Panel for the Alarm by clicking the appropriate radio button:

   <table><thead><tr><th width="220">If you click...</th><th>then...</th></tr></thead><tbody><tr><td>Choosing an existing panel</td><td>select the required Panel from the drop-down list.</td></tr><tr><td>Copying a Panel</td><td>select the Panel you want to copy from the drop-down list, and enter a name for the Panel to copy to.</td></tr><tr><td>Creating a new Panel</td><td>enter a name for the new Panel.</td></tr></tbody></table>
4. Click the **OK** button.

   The **Update Rule Definition** pop-up closes, and the Panel to Display is updated in the grid.

</details>

<details>

<summary>Deleting a Rule</summary>

1. Click on the Panel Rule you want to delete so it becomes highlighted.
2. Click the **Delete Rule** button.

   The Delete Rule pop-up displays.

   ![](https://2455150842-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fi6UYAoyykM6nimMN9yss%2Fuploads%2Fgit-blob-714966f9140def78e3e39664ad44107b1c813dc4%2Fdeleterule_popup.png?alt=media)
3. If there are no other alarms assigned to this panel a **Delete the panel** checkbox will appear also on this screen.

   Tick this checkbox if you want to delete the panel.
4. Click the **OK** button.

   The **Delete Rule** pop-up closes, and the entry disappears from the grid.

</details>

8. Click the **OK** button.

   The columns displayed in the Alarm Viewer Navigation Panel are updated to reflect the changes made. Any additional columns (selected at Step 5) are added as the right-most column(s) in the grid with headings to match the checkbox descriptions.
9. Resize and/or reorder the columns if required, as follows:

   **Note:** The first three columns, (i.e. **Priority**, **Alarm State** and **Occurrence Time** ), are the only ones that cannot be resized or reordered.

   <table><thead><tr><th width="126">To...</th><th>Steps</th></tr></thead><tbody><tr><td>reorder columns</td><td>Click on the column title and drag it to the required position.</td></tr><tr><td>resize columns</td><td><ol><li>Hover over the column divider until the mouse pointer changes to a "double-ended arrow".<br><img src="https://2455150842-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fi6UYAoyykM6nimMN9yss%2Fuploads%2Fgit-blob-799700fde858e7de707020724f69b02cc9167c5c%2Fresize_column.png?alt=media" alt=""></li><li>Click and hold down the mouse button.</li><li>Move the mouse in the required direction until the column is the required size.</li></ol></td></tr></tbody></table>


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.security.gallagher.com/knowledge-hub/command-centre-client/configuring-command-centre/viewer-configuration-overall-process/configuring-the-viewer-navigation-panel/alarm-viewer.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
