> For the complete documentation index, see [llms.txt](https://help.security.gallagher.com/knowledge-hub/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.security.gallagher.com/knowledge-hub/command-centre-client/configuring-command-centre/configuring-licensable-features/broadcast-notification-configuration/creating-a-new-broadcast-notification.md).

# Creating a new Broadcast Notification

### Before you begin

Set up the Notification, Email, and SMS Server Properties. Refer to the topics *"Notifications"*, *"Outgoing Email"*, *"Incoming Email"* and *"Mobile/SMS Notifications"* in the Configuration Client Online Help for the procedures.

Configure Command Centre Notifications. Refer to the topic *"Setting Cardholder 'Email' and 'Mobile' PDFs"* and in the Configuration Client Online Help for the procedure.

### Procedure

Perform the following procedure to create a new Broadcast Notification item:

1. Click the **New Broadcast Notification** button.

   The new Broadcast Notification item is added to the Viewer Navigation Panel, and the Broadcast Notification Configuration pop-up displays.

   ![](https://2455150842-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fi6UYAoyykM6nimMN9yss%2Fuploads%2Fgit-blob-42e2010387316926f505c9bb68bc9493fddf9ad4%2Fbroadcastnotificationconfiguration.png?alt=media)
2. If you want to replace the default name the system has given the Broadcast Notification item, enter a new name in the **Name** field (limited to 60 characters).
3. If required, enter a logical **Description** (limited to 200 characters).
4. The **Division** button defaults to the name of the last Division in which the Operator created a Command Centre item, regardless of whether it was created in the Configuration Client or via the Command Centre Client.

   If this is not the appropriate Division for this Broadcast Notification item to be in, select a Division as follows:

   1. Click the **Division** button.

      A browse tool displays.

      ![](https://2455150842-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fi6UYAoyykM6nimMN9yss%2Fuploads%2Fgit-blob-7b199073d021ca11902823b748c96d639d5d5f0f%2Fselectdivision_browsetool.png?alt=media)
   2. Select the appropriate Division.
   3. Click the **OK** button.

      The pop-up closes and the button changes to the name of the Division you selected.

   **Note:** If you have not set up Divisions yet, you can add these to your Broadcast Notification items at a later stage.
5. Click the **Close** button.

   The Broadcast Notification Configuration pop-up closes.

   There are two tabs, (i.e. **Settings** and **History/Notes** ). The **Settings** tab displays by default.

   ![](https://2455150842-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fi6UYAoyykM6nimMN9yss%2Fuploads%2Fgit-blob-e4d0db51211841b5109a202579a24a9addf976e1%2Fbroadcastnotificationsettings.png?alt=media)
6. In the left-hand side of the viewer, choose the Cardholders to send the notification message to, by clicking the **Select Cardholders to Message** button.

   Cardholders to be added to the Broadcast Notification item using any of the following methods:

   [by Cardholder](https://help.security.gallagher.com/knowledge-hub/command-centre-client/configuring-command-centre/configuring-licensable-features/broadcast-notification-configuration/creating-a-new-broadcast-notification/select-by-cardholder.md)

   [by Criteria](https://help.security.gallagher.com/knowledge-hub/command-centre-client/configuring-command-centre/configuring-licensable-features/broadcast-notification-configuration/creating-a-new-broadcast-notification/select-by-criteria.md)
7. In the right-hand side of the viewer, choose the type of notification you wish to send, (i.e. either Email, SMS, Mobile or all).
8. The Broadcast Notification item starts with a default message that says "This is the default message".
9. Click on the ![](https://2455150842-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fi6UYAoyykM6nimMN9yss%2Fuploads%2Fgit-blob-7c2828918c7cb681beaf46588ec4d5b23de9a63b%2Feditfilterbutton.png?alt=media) button to edit this message.

   The Broadcast Notification Content pop-up displays.

   ![](https://2455150842-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fi6UYAoyykM6nimMN9yss%2Fuploads%2Fgit-blob-b005ba0d396fcf564db3623c21aa756a544e4b12%2Fbroadcastnotificationcontent.png?alt=media)
10. Enter your message and click the **OK** button to confirm the message, or click the **Cancel** button to revert it.

    **Notes:**

    * If the Broadcast Notification List is configured for sending SMS messages, the grey text at the bottom left of the pop-up shows how many characters are left in the current message, followed by a slash, followed by the number of text messages required for sending this message. If the number after the slash is 2 or more, then a multi-part message will be used when sending the message. Check with your email-to-SMS provider to see if they support sending multi-part messages, and what limits the provider has on these.
    * If the Broadcast Notification List is configured for sending emails, the pop-up will show in brackets how many characters have been used, out of the maximum 1000 possible characters.
    * If there is a spelling error in the message, then a red squiggle will appear below the miss-spelt word. Clicking on the squiggle will reveal a list of possible corrections. If the word is in fact correct then the squiggles may be ignored.

      ![](https://2455150842-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fi6UYAoyykM6nimMN9yss%2Fuploads%2Fgit-blob-1b065d73e812b65043e5f7039b0ed3a611533d67%2Fbroadcastnotificationcontentspelling.png?alt=media)
11. If you want to record any note(s) about the Broadcast Notification item, click the **History/Notes** tab.

    Refer to [History/Notes tab](https://help.security.gallagher.com/knowledge-hub/command-centre-client/configuring-command-centre/administration/generic-administration-tasks/history-notes-tab.md) for further detail.
12. Click the **Save** button.

    A new Broadcast Notification item has been created.

    **Note:** When configuring Cardholders to be selected via selection criteria, the actual list of Cardholders to notify is determined at the time the message is to be sent.

### Hints

{% hint style="info" %}
**Editing and Deleting Broadcast Notification items**

Refer to [Editing items](https://help.security.gallagher.com/knowledge-hub/command-centre-client/configuring-command-centre/administration/generic-administration-tasks/editing-items.md) and [Deleting items](https://help.security.gallagher.com/knowledge-hub/command-centre-client/configuring-command-centre/administration/generic-administration-tasks/deleting-items.md) for procedures on how to edit and delete Broadcast Notification items.

**Note:** It is only possible to edit the configuration of a Broadcast Notification item when it is in the "Disabled" state.
{% endhint %}

{% hint style="info" %}
**Duplicating Broadcast Notifications**

Operators privileged to create Broadcast Notification items can also duplicate Broadcast Notification items, which makes the task of setting up multiple Broadcast Notification items that are very similar much quicker.

Refer to [Copying items](https://help.security.gallagher.com/knowledge-hub/command-centre-client/configuring-command-centre/administration/generic-administration-tasks/copying-items.md) for the procedure.
{% endhint %}


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.security.gallagher.com/knowledge-hub/command-centre-client/configuring-command-centre/configuring-licensable-features/broadcast-notification-configuration/creating-a-new-broadcast-notification.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
