> For the complete documentation index, see [llms.txt](https://help.security.gallagher.com/knowledge-hub/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.security.gallagher.com/knowledge-hub/command-centre-client/configuring-command-centre/administration/bulk-changes/creating-a-new-cardholder-bulk-change.md).

# Creating a new Cardholder Bulk Change

Perform the following procedure to initiate a new Cardholder Bulk Change:

**Note:** To perform this procedure operators need both the "Bulk Change" and "Edit Cardholders" operator privileges. Operators also need sufficient divisional and other privileges to carry out the individual changes listed within a bulk change.

1. Click the **New Bulk Change** button on the Viewer Navigation Panel, and then **Cardholder Bulk Change**.

   The new Cardholder Bulk Change is added to the Viewer Navigation Panel, and the Bulk Change Configuration pop-up displays.

   ![](https://2455150842-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fi6UYAoyykM6nimMN9yss%2Fuploads%2Fgit-blob-20fc65a5971211468ee52257ac8650093fbf3f7a%2Fbulkchangeconfig_popup.png?alt=media)
2. If you want to replace the default name the system has given the Bulk Change, enter a new name in the **Name** field (limited to 60 characters).
3. If required, enter a logical **Description** (limited to 200 characters).
4. The **Division** button defaults to the name of the last Division in which the Operator created a Command Centre item, regardless of whether it was created in Configuration Client or via Command Centre Client.

   If this is not the appropriate Division for this Bulk Change to be in, select a Division as follows:

   1. Click the **Division** button.

      A browse tool displays.

      ![](https://2455150842-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fi6UYAoyykM6nimMN9yss%2Fuploads%2Fgit-blob-7b199073d021ca11902823b748c96d639d5d5f0f%2Fselectdivision_browsetool.png?alt=media)
   2. Select the appropriate Division.
   3. Click the **OK** button.

      The pop-up closes and the button changes to the name of the Division you selected.

   **Note:** If you have not set up Divisions yet, you can add these to your Bulk Change at a later stage.
5. Click the **Close** button.

   The Bulk Change Configuration pop-up closes.

   There are two tabs, (i.e. **Change** and **History/Notes** ). The **Change** tab displays by default.
6. Click the **Select Cardholders to Update** button to select all the cardholders that require changing.

   **Note:** Individual cardholders can be selected, or an Access Group can be selected if all the cardholders belonging to the group require changing.
7. Select Cardholders to be updated using any of the following methods:

   [by Access Group](https://help.security.gallagher.com/knowledge-hub/command-centre-client/configuring-command-centre/administration/bulk-changes/creating-a-new-cardholder-bulk-change/select-by-access-group.md)

   [by Cardholder](https://help.security.gallagher.com/knowledge-hub/command-centre-client/configuring-command-centre/administration/bulk-changes/creating-a-new-cardholder-bulk-change/select-by-cardholder.md)

   [by Criteria](https://help.security.gallagher.com/knowledge-hub/command-centre-client/configuring-command-centre/administration/bulk-changes/creating-a-new-cardholder-bulk-change/select-by-criteria.md)
8. Click the **Select Changes to Apply** button to select all the changes required.
9. Select the option(s) you require from the drop-down list.

   **Note:** If you select **Delete selected cardholders**, no other options can be selected. However, one or more of the other options can be selected.
10. Did you select the **Delete selected cardholders** option?

    if **yes**, go to Step 12.

    If **no**, go to Step 11.
11. Refer to the option(s) you have selected for further detail:

    [Access Groups](https://help.security.gallagher.com/knowledge-hub/command-centre-client/configuring-command-centre/administration/bulk-changes/creating-a-new-cardholder-bulk-change/access-groups.md)

    [Authorisation](https://help.security.gallagher.com/knowledge-hub/command-centre-client/configuring-command-centre/administration/bulk-changes/creating-a-new-cardholder-bulk-change/authorisation.md)

    [Card or Credential Details](https://help.security.gallagher.com/knowledge-hub/command-centre-client/configuring-command-centre/administration/bulk-changes/creating-a-new-cardholder-bulk-change/card-or-credential-details-to-change-card.md) (*to change* **Card** )

    [Card or Credential Details](https://help.security.gallagher.com/knowledge-hub/command-centre-client/configuring-command-centre/administration/bulk-changes/creating-a-new-cardholder-bulk-change/card-or-credential-details-to-change-mobile-credential.md) (*to change* **Mobile Credential** )

    [Card or Credential Details](https://help.security.gallagher.com/knowledge-hub/command-centre-client/configuring-command-centre/administration/bulk-changes/creating-a-new-cardholder-bulk-change/card-or-credential-details-to-change-digital-id.md) (*to change* **Digital ID** )

    [Competencies](https://help.security.gallagher.com/knowledge-hub/command-centre-client/configuring-command-centre/administration/bulk-changes/creating-a-new-cardholder-bulk-change/competencies.md)

    [Default Floors](https://help.security.gallagher.com/knowledge-hub/command-centre-client/configuring-command-centre/administration/bulk-changes/creating-a-new-cardholder-bulk-change/default-floors.md) *(this option will only display if the site is licensed for the ThyssenKrupp Elevator Systems)*

    [Division](https://help.security.gallagher.com/knowledge-hub/command-centre-client/configuring-command-centre/administration/bulk-changes/creating-a-new-cardholder-bulk-change/division.md)

    [Lockers](https://help.security.gallagher.com/knowledge-hub/command-centre-client/configuring-command-centre/administration/bulk-changes/creating-a-new-cardholder-bulk-change/lockers.md) *(this option will only display if the site is licensed for the Locker Management Solution)*

    [Passenger Types](https://help.security.gallagher.com/knowledge-hub/command-centre-client/configuring-command-centre/administration/bulk-changes/creating-a-new-cardholder-bulk-change/passenger-types.md) *(this option will only display if the site is licensed for the ThyssenKrupp Elevator Systems)*

    [Personal Data Fields](https://help.security.gallagher.com/knowledge-hub/command-centre-client/configuring-command-centre/administration/bulk-changes/creating-a-new-cardholder-bulk-change/personal-data-fields.md)

    [Relationships](https://help.security.gallagher.com/knowledge-hub/command-centre-client/configuring-command-centre/administration/bulk-changes/creating-a-new-cardholder-bulk-change/relationships.md)
12. The **Allow Bulk Change to be run independently in the Cardholder Viewer** checkbox allows this Cardholder Bulk Change to be run directly from the Cardholder Viewer.

    Check this checkbox if required.

    **Note:** Any change filters in the **Changes to Apply** grid can be edited by clicking the ![](https://2455150842-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fi6UYAoyykM6nimMN9yss%2Fuploads%2Fgit-blob-7c2828918c7cb681beaf46588ec4d5b23de9a63b%2Feditfilterbutton.png?alt=media) button, or removed by clicking the ![](https://2455150842-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fi6UYAoyykM6nimMN9yss%2Fuploads%2Fgit-blob-7fa22e8d9be426ba5f5787abe105815d42650a55%2Fremovefilterbutton.png?alt=media) button.
13. If you want to record any note(s) about the Cardholder Bulk Change, click the **History/Notes** tab.

    Refer to [History/Notes tab](https://help.security.gallagher.com/knowledge-hub/command-centre-client/configuring-command-centre/administration/generic-administration-tasks/history-notes-tab.md) for further detail.
14. Click the **Save** button.

    The Cardholder Bulk Change and its settings are saved.

### Hints

{% hint style="info" %}
**Editing and Deleting Cardholder Bulk Changes**

Refer to [Editing items](https://help.security.gallagher.com/knowledge-hub/command-centre-client/configuring-command-centre/administration/generic-administration-tasks/editing-items.md) and [Deleting items](https://help.security.gallagher.com/knowledge-hub/command-centre-client/configuring-command-centre/administration/generic-administration-tasks/deleting-items.md) for procedures on how to edit and delete Cardholder Bulk Changes.
{% endhint %}

{% hint style="info" %}
**Duplicating Cardholder Bulk Changes**

Operators privileged to create Cardholder Bulk Changes can also duplicate them, which makes the task of setting up multiple Cardholder Bulk Changes that are very similar much quicker.

Refer to [Copying items](https://help.security.gallagher.com/knowledge-hub/command-centre-client/configuring-command-centre/administration/generic-administration-tasks/copying-items.md) for the procedure.
{% endhint %}


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.security.gallagher.com/knowledge-hub/command-centre-client/configuring-command-centre/administration/bulk-changes/creating-a-new-cardholder-bulk-change.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
