> For the complete documentation index, see [llms.txt](https://help.security.gallagher.com/knowledge-hub/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.security.gallagher.com/knowledge-hub/command-centre-client/configuring-command-centre/administration/access-groups/creating-a-new-access-group/cardholders-tab.md).

# Cardholders tab

This procedure describes the configuration on the **Cardholders** tab for an Access Group.

1. Click the **Cardholders** tab.

   ![](https://2455150842-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fi6UYAoyykM6nimMN9yss%2Fuploads%2Fgit-blob-9e5192482186f8add874b745b8fcceb180d13405%2Faccessgroups_cardholderstab_v840.png?alt=media)
2. Add Personal Data Fields (PDFs) appropriate for this Access Group as follows:

   1. Click the **Add Personal Data Fields** button.

      A browse tool displays.

      ![](https://2455150842-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fi6UYAoyykM6nimMN9yss%2Fuploads%2Fgit-blob-f592a51c740e075faec3784e6d257a67c673b6ac%2Fpdfs_to_include.png?alt=media)
   2. Click the checkbox next to each PDF name you want to include, or click the **Select All** button if you want to include all PDFs.
   3. Click the **Add Selection** button.

      The pop-up closes and each of the selected Personal Data Field(s) appear in the **Personal Data** grid.

   **Note:** To remove a Personal Data Field, select (highlight) the PDF you want to remove and click the **Remove** button.
3. Select the cardholders you require to be members of the new Access Group as follows:

   1. Click the **Add Cardholders** button.

      The Select Cardholders pop-up displays.

      ![](https://2455150842-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fi6UYAoyykM6nimMN9yss%2Fuploads%2Fgit-blob-4282590ed2df6fcd449a33720cac15b180cd9620%2Fselectcardholders_popup.png?alt=media)
   2. To find the Cardholder that you want to make a member, select what criteria you want to search on from the **By** drop-down list, (i.e. Name, Description, Division, Card Number, Last Zone Entered, Authorised or All).

      By default, Name is selected.
   3. Start entering characters in the **Search** field.

      A minimum of 3 characters starts the search. However, if you selected Card Number(s) as the search criteria, you need to click the ![](https://2455150842-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2Fi6UYAoyykM6nimMN9yss%2Fuploads%2Fgit-blob-f1056e058547589bcd63a07bc872a1a741ea174c%2Fsearchbutton.png?alt=media) button after you enter a number in the **Search** field.
   4. From the search results, click on the Cardholder(s) you want to make members.

      The Cardholder(s) appear in the lower section and are all checked by default.
   5. Uncheck any Cardholders you do not want to assign, and click the **OK** button.

      The pop-up closes and the selected Cardholder(s) now appear in the **Cardholder Membership** grid.

      **Note:** If you decide to remove a Cardholder from the list, the **Remove** button allows you to do so.

   **Note:** Cardholders that have no 'From' and 'Until' dates beside their names are permanent members of the Access Group.

   If you want to make any cardholders temporary members, (i.e. give them access for a limited period of time), see [Granting temporary access by Access Group](https://help.security.gallagher.com/knowledge-hub/command-centre-client/configuring-command-centre/administration/access-groups/granting-temporary-access-by-access-group.md) for the procedure.
4. The **Membership Defaults** section allows a membership period to be set up for the Access Group. By default, the start and end dates are set to none, therefore membership is permanent.
5. Return to Step 6 of [Creating a new Access Group](https://help.security.gallagher.com/knowledge-hub/command-centre-client/configuring-command-centre/administration/access-groups/creating-a-new-access-group.md) for configuration instructions for the other Access Group tabs.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://help.security.gallagher.com/knowledge-hub/command-centre-client/configuring-command-centre/administration/access-groups/creating-a-new-access-group/cardholders-tab.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
