# 8.80 Full Release

 Enhancements in this version are as follows

<table><thead><tr><th width="119">Tech Ref</th><th width="875">Description</th></tr></thead><tbody><tr><td>96059</td><td>Automation REST API: support for interlock groups</td></tr><tr><td>96958</td><td>Improve error feedback when attempting to send test email notifications as a system or with no email PDF</td></tr><tr><td>97748</td><td>Allow cardholder searches to be case and accent insensitive</td></tr><tr><td>97903</td><td>Update Stimulsoft Reports library for 8.80</td></tr><tr><td>98170</td><td>Remove the Commend intercom viewer</td></tr><tr><td>98349</td><td>Display web client URL in Command Centre when it is enabled</td></tr><tr><td>99621</td><td>VM REST - clickonce builders need rebuilding if we let people change the server port</td></tr><tr><td>100125</td><td>PII - Build API</td></tr><tr><td>100908</td><td>Allow backup tool to work with remote SQL Server</td></tr><tr><td>101037</td><td>Add Performance Counters for diagnosing Morpho issues</td></tr><tr><td>101038</td><td>Add Performance Counter for the number of Cardholder Location Updates per second</td></tr><tr><td>101040</td><td>Add Performance Counter for the number of Notification Manager threads in CCNTSad</td></tr><tr><td>101042</td><td>Add a Performance Counter for the number of TimeManager Timeouts</td></tr><tr><td>65244</td><td>Automatically orientating site plans based on the seated position of a workstation operator</td></tr><tr><td>93771</td><td>Improve diagnostic logging when customisation is not installed</td></tr><tr><td>94882</td><td>Site Plan Performance improvements</td></tr><tr><td>95746</td><td>VM web server config in Classic client</td></tr><tr><td>107458</td><td>Create 8.80 release of PreUpgradeValidation tool</td></tr><tr><td>107461</td><td>8.80 Translation Kits - update post Full Release</td></tr><tr><td>102676</td><td>Automatically install performance counters upon CC install</td></tr><tr><td>104157</td><td>Replace support for SQL2016 SP2 to SQL2016 SP3 in 8.80</td></tr><tr><td>104264</td><td>Bulk Config Tool - Ability to move input/output positions on same HBUS I/O</td></tr><tr><td>104499</td><td>Silent installer completion in 8.80</td></tr><tr><td>104561</td><td>FTSupportTool - Include Read-Only replica information</td></tr><tr><td>104894</td><td>SIP Intercom on Site Plans</td></tr><tr><td>104927</td><td>Bulk Config Tool - Class 5 ELM Support</td></tr><tr><td>105027</td><td>Bulk Config Tool - Rename the current tool</td></tr><tr><td>105430</td><td>GovPass Card Printing (XS)</td></tr><tr><td>105929</td><td>Improve performance of findChangeSets stored procedure</td></tr><tr><td>106503</td><td>Add CEIP Privacy Policy to public website</td></tr><tr><td>106660</td><td>CEIP adoption CC code changes </td></tr><tr><td>107437</td><td>Check for new security-related compiler flags we should enable</td></tr><tr><td>107441</td><td>Update DissallowedPasswords.txt in 8.80</td></tr><tr><td>107442</td><td>Update the Anonymiser tool for 8.80</td></tr><tr><td>107452</td><td>Cryptography and Encryption document update for 8.80</td></tr><tr><td>107455</td><td>Create the translation UID's for 8.80 before FRC</td></tr><tr><td>108996</td><td>Improve "findChangeSetItems" call further</td></tr></tbody></table>

Bug fixes in this version are as follows.

<table><thead><tr><th width="183">Fixed In</th><th width="468">Description</th><th width="111">Tech Ref</th></tr></thead><tbody><tr><td>Server</td><td>Digital ID Bulk Change can display the Email and Mobile PDF's used for Mobile Credentials</td><td>97780</td></tr><tr><td>Workstation</td><td>v8.70 Consistently Failing Scenarios - LFPD-308428649-1695 - GovPASS Card Types - Command Centre Client</td><td>99865</td></tr><tr><td>Server, Mobile</td><td>Mobile Client crash during automation -  'It is an error to get databaseService before logging on to a server'</td><td>100015</td></tr><tr><td>Server, Web Client</td><td>Password Change - Using cardholder property pages to force set an operator's password doesn't add to password history, allows "re-use."</td><td>100189</td></tr><tr><td>Server</td><td>Site Plans - Embedded site plan does not become visible when focused</td><td>100432</td></tr><tr><td>Workstation</td><td>Configuration Client Start-up image is horribly out of date</td><td>100839</td></tr><tr><td>Workstation</td><td>Jacques Intercom issue in the Command centre client</td><td>101219</td></tr><tr><td>Server</td><td>Multiserver changesets not being applied</td><td>101321</td></tr><tr><td>Server</td><td>Can't apply item menu changeset because its associated item has been deleted</td><td>101357</td></tr><tr><td>server</td><td>Delete a cardholder while it's in the waiting queue of a car park will cause controller statement conflicted issue</td><td>101436</td></tr><tr><td>Middleware/Server</td><td>SIP service tries to get localhost IP address and fails because of NO internet</td><td>101444</td></tr><tr><td>Server,Web Client</td><td>TOTP secret doesn't get created for "Advanced User", only if people explicitly have "Use Web Client"</td><td>101481</td></tr><tr><td>Server</td><td>Use Intercom privilege description displaying "Call or receive calls from an IDT"</td><td>101605</td></tr><tr><td>Server</td><td>View Site Only Operator in Root Division can change server properties</td><td>101630</td></tr><tr><td>Server</td><td>Config client setup folder shows as shared after upgrade from 8.60</td><td>101732</td></tr><tr><td>Server</td><td>Silent Installer - Installer ran successfully but failed to create db.</td><td>101756</td></tr><tr><td>Server/Middleware</td><td>SIP service is going offline every few seconds</td><td>101967</td></tr><tr><td>Workstation</td><td>Command center client crashed after making a call to the intercom device</td><td>102046</td></tr><tr><td>Middleware/Server</td><td>SIP Endpoint service version not showing up in control panel</td><td>102049</td></tr><tr><td>Server</td><td>Wrong file path when Double clicking FTTemplate "Starter Kit Templates" results in error</td><td>102064</td></tr><tr><td>Server</td><td>Spelling mistake in name of software upgrade event </td><td>102238</td></tr><tr><td>Server</td><td>Silent Installer - Duplicate network shares created with silent installer on upgrade </td><td>102384</td></tr><tr><td>Workstation</td><td>Operator privilege to batch print/encode card changed</td><td>102503</td></tr><tr><td>Server</td><td>Setup.exe fails on a particular service account scenario</td><td>102560</td></tr><tr><td>Server</td><td>Salto Sync issue</td><td>102844</td></tr><tr><td>Server</td><td>Cloning an Access Group caused various issues </td><td>103012</td></tr><tr><td>Server</td><td>findChangeSets stored proc performance issues</td><td>103103</td></tr><tr><td>Workstation</td><td>Alarm Note lightbox can become stuck open</td><td>103507</td></tr><tr><td>Server</td><td>Server UHE on trace event</td><td>103522</td></tr><tr><td>Workstation</td><td>Temperature report fails to generate</td><td>103686</td></tr><tr><td>Server</td><td>Division delete does not delete from the DivisionInductionMaterial table, preventing deletion of Competencies</td><td>103790</td></tr><tr><td>Server</td><td>Kone ELI Access zone become not configured when open the property.</td><td>104202</td></tr><tr><td>Server</td><td>Austco calls don't show in call queue when logged in as operator with correct privileges</td><td>104358</td></tr><tr><td>Workstation</td><td>Cardholder Wizard: Adding cards without Access Group results to Assert error</td><td>104468</td></tr><tr><td>Workstation</td><td>Multiple card status "Disabled (Unauthorised)" appearing</td><td>104640</td></tr><tr><td>Workstation</td><td>[Site Plan]. Item names not updating when renamed from Classic.</td><td>104893</td></tr><tr><td>Server</td><td>REST API timed overrides can occur up to a minute earlier than expected</td><td>104909</td></tr><tr><td>Workstation</td><td>When item menus are showing and the intercom is ringing/connected, the overlay shows different colour</td><td>104919</td></tr><tr><td>Workstation</td><td>Site Plans IMCs go beyond viewport</td><td>104987</td></tr><tr><td>Server</td><td>Calls made to deleted sessions, causing CCNTSad crash</td><td>105094</td></tr><tr><td>Server</td><td>Do SQL upserts correctly so that they work when called concurrently</td><td>105194</td></tr><tr><td>Server</td><td>Advanced Search issue in configuration client</td><td>105313</td></tr><tr><td>Workstation</td><td>CREATE UNIQUE INDEX statement terminated</td><td>105318</td></tr><tr><td>Workstation</td><td>Macro Operator confirmation popup can't be dismissed among switching viewers</td><td>105810</td></tr><tr><td>Workstation</td><td>CC Client crashed due to Jacques exception: JCCP_ERR_PROPERTY_NOT_DEFINED</td><td>105811</td></tr><tr><td>Server</td><td>Release the OperatorSessions m_lock whilst calling the "sessionSetLastContact" stored proc</td><td>105826</td></tr><tr><td>Server</td><td>Server lock while modifying operator group permissions</td><td>106345</td></tr><tr><td>Workstation</td><td>Command Centre slows down couple of seconds with "Search By Card" Selected </td><td>106544</td></tr><tr><td>Server</td><td>Issue level picked up incorrectly on a wiegand input</td><td>106589</td></tr><tr><td>Server</td><td>Unable to edit and save 46-bit UCF</td><td>106664</td></tr><tr><td>Workstation Client</td><td>Deleted cardholder still in Schedule/macro output in report for emails causing SQL error</td><td>106760</td></tr><tr><td>Workstation Client</td><td>Random Selection competency selection missing a competency</td><td>107006</td></tr><tr><td>Workstation Client</td><td>Camera does not show in intercom call window control</td><td>107399</td></tr><tr><td>Workstation Client</td><td>Lag when toggling between cardholder viewer search results, only when encoder attached to VM</td><td>107515</td></tr><tr><td>Server</td><td>REST leaks info when editing a cardholder the operator cannot see [easy/medium]</td><td>107679</td></tr><tr><td>Workstation Client</td><td>Command Centre Client Crash while saving a cardholder</td><td>107811</td></tr><tr><td>Mobile Connect</td><td>Mobile connects digital id doesn't reflect pdf changes</td><td>108016</td></tr><tr><td>Server</td><td>Confusion for REST Client Certificate</td><td>108049</td></tr><tr><td>Visitor Management</td><td>VM - creating visits with missing mandatory visitor fields</td><td>108176</td></tr><tr><td>Visitor Management</td><td>VmCabclient doesn't respect unique pdf values</td><td>108322</td></tr><tr><td>Visitor Management</td><td>VM - reception reports freezing when signing in a visitor</td><td>108324</td></tr><tr><td>Visitor Management</td><td>VMcabclient, print badge fails if the host and the visitor are the same</td><td>108468</td></tr><tr><td>Visitor Management</td><td>VMCABClient performance issues - windows certificate validation failed connections</td><td>108495</td></tr><tr><td>Workstation Client</td><td>Command Centre Client Crash - Alarm viewer</td><td>108569</td></tr><tr><td>Visitor Management</td><td>Incorrect Email Subject when visitor is signed in</td><td>108570</td></tr><tr><td>Server</td><td>Websocket UHE 24/08/2022</td><td>109234</td></tr><tr><td>Server</td><td>Site Plan door items no longer show SIP call status</td><td>109936</td></tr><tr><td>Server</td><td>Command Centre 8.80+ shows recurring popups when failing to process large event details from controller</td><td>110650</td></tr><tr><td>Server</td><td>Commend Call Forwarding in the Site Plan is missing a Complete button</td><td>110315</td></tr><tr><td>Workstation Client</td><td>Delete a cardholder while it's in the waiting queue of a car park will cause controller statement conflicted issue</td><td>101436</td></tr><tr><td>Server</td><td>v8.80 Automation Failing Scenarios - CFT CS0076 - TOTP Secret - Command Centre Client &#x26; MBC SV0018 - Web services auth token refreshing</td><td>108159</td></tr><tr><td>Workstation Client</td><td>8.80 Site Plan Sip intercom pop issue</td><td>110599</td></tr></tbody></table>


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://help.security.gallagher.com/command-centre/command-centre-releases/release-history/unsupported-gallagher-command-centre-versions/command-centre-8.80-releases/8.80-full-release.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.