# 8.60 Full Release

The first 8.60 Release of Command Centre is vEL8.60.1270

For a complete list of new features refer to the feature summary.

Enhancements or bugs resolved in this version are as follows.

<table data-header-hidden><thead><tr><th width="174"></th><th width="475"></th><th></th></tr></thead><tbody><tr><td>Category </td><td>Description </td><td>Tech Ref </td></tr><tr><td>Configuration Client</td><td>Configuration Client exception from uppercase RLL files</td><td>92010</td></tr><tr><td>Command Centre</td><td>Exception caused by Engage Card events</td><td>90293</td></tr><tr><td>Command Centre Client</td><td>Missing cardholder history and ‘Load All History Button’ in Command Centre Client</td><td>92176</td></tr><tr><td>Command Centre Client</td><td>Large numbers of AutomationPeer objects in memory causes Command Centre Client crash</td><td>92199</td></tr><tr><td>Command Centre Client</td><td>Command Centre Client crash when an alarm Cardholder Cards Tile is viewed with a credential</td><td>92254</td></tr><tr><td>Command Centre</td><td>Unrelated Outputs triggered after Card Access granted on a third-party reader that is attached to a C6000 Plugin Module</td><td>92381</td></tr><tr><td>Command Centre</td><td>Veridt Reader non-functional when configured for two or three factor authentication</td><td>92459</td></tr><tr><td>Configuration Client</td><td>Words missing in Configuration Wizard UI</td><td>92479</td></tr><tr><td>Command Centre </td><td>Cardholder history has “altered” information </td><td>92511</td></tr><tr><td>Command Centre</td><td>Notification System Error alarms due to persistent connection to SMTP server</td><td>92644</td></tr><tr><td>Command Centre</td><td>Exception when digital ID is pushed to the Controller</td><td>92676</td></tr><tr><td>Command Centre</td><td>Scheduled Email Reports are not sending</td><td>92848</td></tr><tr><td></td><td></td><td>93024</td></tr><tr><td>Command Centre</td><td>Server rejecting status message from Controller </td><td>92930</td></tr><tr><td>Configuration Client</td><td>Supported images not visible in Configuration Site Map </td><td>92948</td></tr><tr><td>Configuration Client</td><td>Configuration Client Workstation Exception</td><td>93022</td></tr><tr><td>Command Centre and Configuration Client </td><td>Server exception caused by DCOM</td><td>93198</td></tr><tr><td>Command Centre Client</td><td>Alarm associated with a site plan causes workstation crash</td><td>93450</td></tr><tr><td>Configuration Client</td><td>Exception when assigning a T20 reader to a Door that is connected to another Controller </td><td>89838</td></tr><tr><td>Configuration Client</td><td>Crash caused by a lock in Configuration Client while editing </td><td>90158</td></tr><tr><td>Configuration Client</td><td>Exception created when dragging and dropping FTItems between Config Client applications pointing to different servers </td><td>90321</td></tr><tr><td>Multi-Server</td><td>Pending changesets due to Missing DisplayOrder ChangeSetFields </td><td>91056</td></tr><tr><td>Command Centre</td><td>Command Centre Service restarting automatically due to a bad version event from Controller </td><td>91413</td></tr><tr><td>Morpho</td><td>Stuck update(s) pending for on Morpho Wave readers with firmware 2.6.2 </td><td>92116</td></tr><tr><td>Multi-Server</td><td>Exception created due to a mismatch in parent/child relationship in embedded site plans </td><td>92272</td></tr><tr><td>Command Centre</td><td>Salto server request failed alarms when enrolling cardholders on site </td><td>86437</td></tr><tr><td>Command Centre Client</td><td>Car Park allocations show as duplicate in Car Park viewer, followed by Command Centre Client crash when clearing already deleted duplicate allocations </td><td>86958</td></tr><tr><td>DHCP</td><td>DHCP lease renew not being received when using the Send renew DHCP settings override </td><td>87347</td></tr><tr><td>Command Centre</td><td>Exception due to events with no attributes coming from other servers </td><td>88060</td></tr><tr><td>Command Centre</td><td>Backup fails due to incorrect permissions </td><td>88541</td></tr><tr><td>Salto</td><td>Exception caused by Salto OnTimeout method being called before initialisation of Salto Communicator</td><td>88725</td></tr><tr><td>Morpho</td><td>Unsent Biometric changes due to the Controller not receiving resync biometric records, and updates to the Facility code of Morpho Biometric Type </td><td>88917</td></tr><tr><td>Configuration Client</td><td>Print Spooler stoppage causes Configuration Client to crash when a report is run </td><td>89147</td></tr><tr><td>Command Centre</td><td>Exception caused by a lock in MobileTagBoardMonitorService</td><td>89344</td></tr><tr><td>Visitor Management</td><td>Invitation emails fail to send via Outlook </td><td>89403</td></tr><tr><td>Command Centre</td><td>Large number of status updates causes deadlock in the Event Server </td><td>89533</td></tr><tr><td>Multi-Server</td><td>Scheduled macro logon failure in remote server </td><td>89623</td></tr><tr><td>Salto</td><td>Exception caused by resync from an operator with insufficient privileges </td><td>87909</td></tr><tr><td>Command Centre</td><td>Database call unsuccessful during upgrade caused by auto-generated default constraint </td><td>90097</td></tr><tr><td>Morpho</td><td>Morpho Wave with firmware 2.x.x producing “The reader has rejected some configuration and a firmware update may be required” error due to non-supported parameter </td><td>90124</td></tr><tr><td>Configuration Client</td><td>Unable to generate Contact ID Assignment Report in a subdivision </td><td>90876</td></tr><tr><td>Command Centre Client</td><td>Automation peers being enabled by default, causing Command Centre Client to crash </td><td>92199</td></tr><tr><td>Visitor Management</td><td>Duplicate unique ID causing Visitor Management Client operator to log off </td><td>92384</td></tr><tr><td>Configuration Client</td><td>Exception caused by Access Group permissions when running report  </td><td>93022</td></tr><tr><td>Elevator</td><td>Access zones appearing as unconfigured when it should be offline or awaiting status, and sporadic changes of Access Zone statuses </td><td>86575</td></tr><tr><td>Command Centre</td><td>Exception when changing the Default Privilege property of a PDF </td><td>87386</td></tr><tr><td>Performance</td><td>Configuration Client freeze from Triggered Overrides in Lifts Access Zone </td><td>87455</td></tr><tr><td>Command Centre</td><td>Exception when retrieving cardholder’s card changes with Digital ID type card assigned to the cardholder using RestAPI  </td><td>87541</td></tr><tr><td>Configuration Client</td><td>Elevator floor access zones showing ‘not fully configured’ status instead of offline or awaiting status  </td><td>87645</td></tr><tr><td>Configuration Client</td><td>‘Invalid string or buffer length’ error when assigning exit reader at a door </td><td>87989</td></tr><tr><td>Visitor Management</td><td>Visitor Management mobile invitation email fail to send via SMTP with SSL enabled. </td><td>89736</td></tr><tr><td>Command Centre</td><td>Logged off or expired session while there were still attempts to get its session ID causes exceptions </td><td>91928</td></tr><tr><td>Command Centre</td><td>Removing the description of an item causes exception</td><td>92032</td></tr><tr><td>Multi-Server</td><td>Pending changes due to SitePlan DisplayOrder conflict </td><td>89454</td></tr><tr><td>Multi-Server</td><td>Unable to join a new server to a system that has previously deleted a server </td><td>91033</td></tr><tr><td>Multi-Server</td><td>Multi-Server join can cause CCNTSad to become inoperable due to incomplete SitePlan </td><td>91041</td></tr><tr><td>Multi-Server</td><td>Replicated club memberships can fail to apply when required PDFs are involved </td><td>91055</td></tr><tr><td>Multi-Server</td><td>Replicated cardholder roles with a deleted related cardholder will fail to apply </td><td>91129</td></tr><tr><td>BuReau Encoding</td><td>BuReau Encoding improvement </td><td>91602</td></tr><tr><td>Command Centre Client</td><td>Configuring an intercom viewer with a panel result in the error ‘The INSERT statement conflicted’  </td><td>91888</td></tr><tr><td>Multi-Server</td><td>Incomplete SitePlan can be created when changesets apply out of order </td><td>91994</td></tr><tr><td>Multi-Server</td><td>Event notification differs depending on which server the client is viewed on </td><td>92174</td></tr><tr><td>Multi-Server</td><td>Event notification differs depending on which server the client is viewed on </td><td>92174</td></tr><tr><td>Multi-Server</td><td>Replicated biometrics can cause exception when applied out of order </td><td>92559</td></tr><tr><td>Command Centre Client</td><td>Command Centre Client search improvement </td><td>92641</td></tr><tr><td></td><td></td><td></td></tr></tbody></table>


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://help.security.gallagher.com/command-centre/command-centre-releases/release-history/unsupported-gallagher-command-centre-versions/command-centre-8.60-releases/8.60-full-release.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.